Recent content by Mehrdad

I'll do it for sure.I live in Dubai and it's extremely hot here . Riding a bike is nearly impossible during the summer ☀️ . I'm going to use Engine ice coolant this time .it's quite expensive here but I think it's worth it. Thanks for your useful information 👍

I did the procedure as per the manual and I'm sure that I didn't miss anything. The fan didn't come on but when I move the bike to left and right it worked mainly because, the water level wasn't up the fan sensor but not sure, I'll drain the oil to see if there is any water coming out first.As...

Hi mate, Thank for your help, What I meant by going off is that it's rpm is slowly going down until it stops. Also as I have mentioned, there is a very small leak on the radiator so I guess I'll have to fix that too. I'll do all these check ups and get back here, Really appreciate it!

I used oem orings and gray JB-weld gasket maker and its perfect!

Hi everybody, Let me tell you the story first, It was a few months ago that I had to replace the coolant joints on the cylinder head since the they had a leak .These things were really corroded and I had to break them into pieces and they them out .Finally I got Oem orings and joints, applied a...

Sorry ,what I meant is that it is still the same problem. I will check the manual to see what I can do.thanks for your advise.

I changed all spark plugs to Iridium and also replace the air filter with new one but it's still the same.:( the gasoline smell is still there neither popping!anyone can tell me how to reduce the amount of fuel in mixture?

They said that they did it but I can't trust them:(

Hi Everyone, I have a 2000 vmax1200. Lately I took it to a workshop to get it serviced. They did carb and fuel tank cleaning. It works fine but as soon as it warms up both exhausts keep popping very loudly and to be honest it's annoying. It's not happening while riding only when I stop or it's...

I'm sorry everyone, what I meant was tachometer and water temperature gauge. I removed the whole cluster and tested it with multimeter and it was fine but as soon as I put back the short was back again .I noticed this when I was trying to find out out why my low beam head light is not working...

Hi guys, I had a short in my electrical system and after using a multimeter I found out that there is a short in my pedometer and water temp gauge. When I disconnect the connections of panel the short is gone. Can anyone tell me what can be wrong with my pedometer or water temperature gauge...