Recent content by Mopheos

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. M

    85 Vmax for sale -SOLD-

    Re: 85 Vmax for sale Bike sold
  2. M

    85 Vmax for sale -SOLD-

    1985 Vmax, 43,773 miles, hasn't run last two years due to a charging problem I didn't fix. Also has problem with 2nd gear sometimes popping out when leaning on the throttle. Has good front tire, very good rear tire, customized seat and a variety of parts that come with bike - stock exhaust, set...
  3. M

    85 Vmax

    4921
  4. M

    85 Vmax

    Like a lot of these oldies, it does pop out of 2nd when you get on it
  5. M

    85 Vmax

    Here's a few photos
  6. M

    85 Vmax

    I have a 1985 Vmax that I want to sell. I rode it for three years but it has been sitting the last two summers in my basement due to an electrical/charging problem I didn't have time to fix and it is presently not running. Anyone have a general idea of its value as it is? Thx.
  7. M

    center stand

    Hatter, I'm not sure of the brand slipon exhaust I have (it was a fleabay special), but it uses the stock downpipes - but now come to think of it, I bought this bike with a 4-2-1 Holeshot on it...hmmm, hope the PO didn't cut the tabs off.:ummm:
  8. M

    center stand

    Thanks to you all for the info and generous offers.
  9. M

    center stand

    I have an 85 max that lacks the center stand, and there is a new center stand from a 2001 on ebay for 50.00. Does anyone know if that year will fit my 85, and is 50.00 too expensive? Thanks.
  10. M

    What mods to make a vmax comfy for a 6'2" guy

    Do you have the carbtune for sale, Ron? Is it a 4 line tuner and how much? Thanks. Tim
  11. M

    Carb sync tool for less than $25

    I'm a little confused with this sync tool - after you balance 1 & 2 (using left front carb as base carb), do you put the two hoses on the 3 & 4 carb manifold? Or do you leave one hose on the base carb and hook the other hose to each successive manifold port? And when balancing 1 & 2 with 3 & 4...
  12. M

    How is this possible?

    As per my first comment in this thread, I did ride 10 or so miles after I noticed gas leaking under the bike, and the bike ran really crappy the whole 10 miles home. Could I have been pumping gas into a cylinder whose plug was fouled and so not burning the gas but just filling up the intake...
  13. M

    How is this possible?

    Thanks NG. What do I do about the gas that is standing in the no 2 & 3 vboost ports? Is there a way to purge it? Oh by the way, I checked the vboost operation, and it appears the vboost is kaput, too. Dang. That PO told me the carbs had just been rebuilt when I got the bike last October, but I...
  14. M

    How is this possible?

    Sorry about asking so many questions, but I do appreciate all the help from the forum. I just removed the carb assembly from the bike, and as I look into the ports of the VBoost(?) which each flow into the cylinder heads, the number two port and the number three port both have gas standing in...
  15. M

    How is this possible?

    So just went outside to look at the max, which is sitting under a cover, hasn't been run today. Gas is steady dripping from somewhere and I can see it dripping down into a pan under the bike. So I removed the air box and held the throttle open and pushed each slide out of the way. Looking down...
Back
Top