Search results

Looking for the plastic housing (black plastic part) that attaches to the pump motor. If you have a broken fuel pump that doesn't have any cracks email me with a price. Thanks

Looking for carb bodies #1 and #2. I over drilled the pilot screw hole trying to remove a frozen pilot screw. :bang head::bang head::bang head:

Hey guys, anybody using 06 gsxr 600 COP? I bought a set from fleabay and have a couple questions someone here might have the answer to. I get a primary resistance of 3.7-3.9. The secondary resistance is 13.8-13.9k (cold). The resistance goes up when the bike gets hot 14.9-18.3. I also get a...

In desperate need of some help. Okay here we go....screwed the pooch by drilling out #1 and#2 pilot screws. Now the holes are too big and the screws only allow me to turn them out 3 turns. Tore apart the carbs completely 6 times, not a speck of dirt. Float levels set and diaphragms are good...

Okay guys here's a tough question. My fuel screws are seized in carbs 1 & 2. The cylinders only fire when I blow through the fuel vent hose which forces fuel into the idle circuit. I adjusted 1&2 carbs vacuum to pull harder, hence pulling more fuel. Now all cylinders are firing but I can't seem...

Last week I decided to clean my carbs due to finding rust in the fuel filter and lack of power at WOT, bike sounded like a helicopter.. Yanked the carbs, cleaned, and reset the float levels. Put it all back together. Resynced the carbs and Pulled #1 spark plug wire, no difference in idle...

I guess I used a little more force then necessary and stripped the threads on the body of the carb for the diaphragm cover. Has anyone tried to fill up the hole and re tap? I thought about using JB weld but read alot of poor reviews on the products performance.:ummm: If all else fails..... let...

Just got my carb boots installed, cleaned the carbs, resynced the carbs, now my bike idling like --ap!! I disconnected the plug from #3 coil and it made little to no difference in the way the bike idled. Put #3 back together and disconnected #1 and same thing, little to no difference in the way...

Hi, wondering if someone has had this problem. Carbs synchronized but still idles rough. Took her out for a test run after I synched the carbs. Cracked open the throttle and took off up to 6500 rpm then nothing. It felt like there was no gas getting to the engine, just flat. New fuel filter...