Carb flood/ hessitate when roll on

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Hamsie

Member
Joined
Jan 23, 2015
Messages
11
Reaction score
0
Location
holbæk
Hi there.

My max startet to act funny. Hessitates on roll on, But power comes at higher rpm´s.

Pulled the airbox for a peashooter and noticed this "flooding" from one of the carbs.

I made a vid on youtube, if one of you have the time to look it would be great.

I know you cant say for sure whats wrong, but maybe point me in the right direction.

Link to Video.

https://www.youtube.com/watch?v=3Qtyv4cibDo&feature=youtu.be

Best regards from denmark :-D
 
Probly a stuck float, tap the cover of that carb with a rubber mallet or screwdriver handle, see if it stops.

You could also shut it off, drain that carb down and let it re-fill, might flush any particles out.
 
Hi there.

My max startet to act funny. Hessitates on roll on, But power comes at higher rpm´s.

Pulled the airbox for a peashooter and noticed this "flooding" from one of the carbs.

I made a vid on youtube, if one of you have the time to look it would be great.

I know you cant say for sure whats wrong, but maybe point me in the right direction.

Link to Video.

https://www.youtube.com/watch?v=3Qtyv4cibDo&feature=youtu.be

Best regards from denmark :-D

You have a stuck float in your #3 carb-you can see the gas come up through it----Try this------
https://www.youtube.com/watch?v=erLUZjb6Xrw
 
Probly a stuck float, tap the cover of that carb with a rubber mallet or screwdriver handle, see if it stops.

You could also shut it off, drain that carb down and let it re-fill, might flush any particles out.

Yep, always a good thing to drain the carbs, and just see if you have crap in the fuel....etc.
 
Yeah. My bike did exactly the same thing a few years ago. The"crap" that came out of the float bowls was the rubber from the fuel lines past the filter that was falling apart.
 
Update :
Nothing happend with the drain and wack. But i tryid another thing i found online.
Opened drain screw, and blew carb cleaner into the black rubber drain hose and into the bowl.
Let it sit for a vile and then drain and wack again. Now it seems to work again :-D Thx ppl.

Just for info, if this didnt work, was the next step to pull and clean carbs ?
 

Latest posts

Back
Top