Alpinerider88
Member
When I pull my clutch lever in and rev the motor on my 1200 vmax I can feel bike wanting to move forward
You may get lucky and just need to flush the system, change fluid, and bleed it. Make sure all fittings are tight and tgere are no leaks in the system.Thanks I will check out the fluid, i hope thats all.
Also the lever has about 3/4 inch of play it seems like its too much
Thanks I will check out the fluid, i hope thats all.
Also the lever has about 3/4 inch of play it seems like its too much
I was leaking fluid. The master and slave appear ok, and the old cable was pretty much gone where the metal meets the rubber so was leaking there. Also, I had changed the fluid a few months back and it was already black so something was contaminating it. Replaced with the galfer and the master gasket. I may need to address the slave at some point though.
Enter your email address to join: