#18-8 S/S Allen Bolt Kits @ BRC

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

dannymax

Well-Known Member
Supporting Member
Joined
Jun 25, 2008
Messages
13,536
Reaction score
432
Location
columbia county new york
The two main reasons for stripped carburetor body bolts is 1) over tightening and/or 2) allen bolts too short.

BRC has Allen Bolt Kits consisting of (89) bolts & (23) lock washers - broken down as follows:
(16) #18-8 S/S 6mm Socket Cap side & bottom bracket bolts
(16) #18-8 S/S 5mm Socket Cap diaphragm cover bolts
(16) #18-8 S/S 5mm Button Head float chamber cover bolts
(41) #18-8 S/S M4 & M5 socket cap Allen bolts for jet blocks, cut-off diaphragm covers, starting enricheners & top brackets
(23) #18-8 S/S 4mm lock washers - (used in all original factory locations)

Bolts to replace every Phillips head screw on carbs & brackets.
Bolt lengths are spec'd to utilize all threads but not protrude thru holes

Cost for the (89) allen bolt & (23) lock washer set is $38 + $8 shipping to US zip codes. *

*NOTE--(Kit is included with BRC carb rebuild)

Photo represents packaging only - does not show complete kit.
 

Attachments

  • IMG_0627.jpg
    IMG_0627.jpg
    54.7 KB · Views: 96
Last edited:

Latest posts

Back
Top