'09 Honda CBR 600RR LED tailight

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

jlb7569

Well-Known Member
Joined
Aug 17, 2016
Messages
99
Reaction score
0
Location
Mentone, IN
Hello, I ordered the wrong tailight to custom install onto my '06 vmax. I was supposed to get an '06! LOL Anyways, I decided to go ahead and use it. I'm very impressed with how it turned out. Here's a few pictures of it installed onto my bike. I only paid $20 for it off of Ebay.
545ab9d00ef020079bfd9e35e8fe422d.jpg
8c3cc73ac943a2360dad23104d339da5.jpg
33119975d7693432bd3690468a508a3a.jpg
1173aeec8a328328c084bd364a7760e8.jpg
536ace50875234610e636e711870fcc8.jpg
1c5aeb7876e93abb4ebe8c99b09a5aa5.jpg
eaae71fc61af77e83b3ad20ecb073fda.jpg


Sent from my SM-N920T using Tapatalk
 
Thanks, it's a lot better than the original!

Sent from my SM-N920T using Tapatalk
 
This is what I have done to the rear of my vmax since my last post on here.
5a2eadca0023c74ce0d5034cbc250eb7.jpg
3c4ff4e1640fae80c53bac70a04e0d46.jpg
357788c94661e32ccfdadf9d6088129b.jpg
533084dcd912782ccb66a2235588ea38.jpg
0b4878ee9b7a40370e4aa5daa798a969.jpg


Sent from my SM-N920T using Tapatalk
 
I really like the new look and the lights are so much brighter than the factory ones!

Sent from my SM-N920T using Tapatalk
 
I cut my inner fender back about 5". I kept the inner fender to keep the wires in place, but I've had friends ditch the inner all together. I fooled around making brackets and fitting, but ended up siliconing the light into the fender. It's still tight after three years. I made a simple braket for the plate, and used lighted bolts for the plate.
Steve-o
 

Attachments

  • user2101_pic9232_1402232443.jpg
    user2101_pic9232_1402232443.jpg
    75.9 KB · Views: 39
Hey, looks really nice and clean that way. I've still got an '06 CBR 600RR LED tailight if I ever want to make it look similar to yours.

Sent from my SM-N920T using Tapatalk
 

Latest posts

Back
Top