Headlight adjustment

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

oz1961

Well-Known Member
Joined
Aug 17, 2013
Messages
142
Reaction score
10
Location
Japan
I finally fitted and connected my LED headlight

I am wondering if anyone knows the correct headlight adjustment height? Procedure?
d50dc5d7ca0763a3b8c8aeb6c3043b61.jpg
42dae6d4ee9db764855e8d277b1c9b15.jpg



Thanks in advance


Sent from my iPhone using Tapatalk
 
From Google:

Place the bike 25 feet from the wall or garage door (4). Measure from the center of the headlight to the ground with the bike level (5). Now go over to the garage door and mark one line at the same height above ground, and another two inches lower (6). Use a carpenter's level to draw a horizontal reference line (7). Switch on the headlights and mount the motorcycle. The low beam's upper cutoff point should rest right on the lower line (8). Because most bikes have combined high- and low-beam reflectors, setting the height (and checking to see that the beam is centered along the bike's long axis) is about all there is to it. But if you have separate high beams, make the center of the high beam land on the upper line.
 

Latest posts

Back
Top