Added some LED s today...

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

V-Maximus-98

Well-Known Member
Joined
Feb 17, 2017
Messages
47
Reaction score
0
Location
West Texas
Spent a few hours cutting and soldering the strips together, running them under stuff on the bike and figuring out the wiring. Got done except for wrapping some wires with black stuff... ran battery down in the process. I think it's was weak due to lack of use anyway.
 

Attachments

  • 20170220_222115-1.jpg
    20170220_222115-1.jpg
    50.6 KB · Views: 89
  • 20170220_221917-1.jpg
    20170220_221917-1.jpg
    64.3 KB · Views: 93
  • 20170220_221903-1.jpg
    20170220_221903-1.jpg
    60.2 KB · Views: 93
  • 20170220_221942-1.jpg
    20170220_221942-1.jpg
    47.1 KB · Views: 80
Thank you!
For the rear license plate lights, wired them under the seat accordingly. Brake lights and running lights are operational. Fabricated a shield plate out of an old license plate from a car. Easy to cut, easy to bend and comes right off if need be.
Not the cleanest so some of you will do better.
 

Attachments

  • 20170221_103041.jpg
    20170221_103041.jpg
    26.4 KB · Views: 44
  • 20170221_103554.jpg
    20170221_103554.jpg
    50.4 KB · Views: 43
  • 20170221_110353.jpg
    20170221_110353.jpg
    45.6 KB · Views: 42
Just finished adding a USB/12v receptacle. .. it doubles as a battery tender cable. Please excuse the funny connection but was only for testing purposes.
 

Attachments

  • 20170221_121330.jpg
    20170221_121330.jpg
    55.9 KB · Views: 49
  • 20170221_121345.jpg
    20170221_121345.jpg
    50.5 KB · Views: 48
  • 20170221_120809.jpg
    20170221_120809.jpg
    60.1 KB · Views: 45

Latest posts

Back
Top