Flywheel cover won't come off

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Neshobanakni

New Member
Joined
Dec 31, 2011
Messages
1
Reaction score
0
Location
mississippi
Anyone have any tips on getting the left side flywheel cover off of my '91? I've removed all eleven bolts but no luck so far. I'm trying to replace the starter clutch using the instructions found here.
 
Did you take the middle drive cover off to.


Sent from my iPhone using Tapatalk Pro
 
Anyone have any tips on getting the left side flywheel cover off of my '91? I've removed all eleven bolts but no luck so far. I'm trying to replace the starter clutch using the instructions found here.

There are magnets and it takes a hard pull.
 
Use a rubber mallet or a plastic head one, rap-around the perimeter, and you should get it to part. Be very careful prying, you don't want to deform a mating surface or crack a casting.
 
Is it the seal won't release? Or is it hard to pull off? Like stated, the flywheel has strong magnets
making removal slightly more difficult than it appears.
 
When you remove it most likely the starter gears will fall off. Make sure you put them back together as specified as there is one that only goes one way

Sent from my SM-G930F using Tapatalk
 

Latest posts

Back
Top