Crazy excited

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Jcrbullrider

New Member
Joined
Jul 28, 2022
Messages
1
Reaction score
0
Location
Elkhart, Indiana
Had an 85 back in the day with kerker and I don't know what else it was way faster than stock maxes that I raced. Wrecked it trying to see exactly how fast it would go, high speed wobble, probably close to 145, walked away with just road rash. And bike was still drivable, minus a footpeg and turn signal. Anyway, I just bought a pos 2001. Running on 3 cylinders, been laid down and has a rebuilt title, but $2800 and rode it home.
I've barely looked at it yet. Of course I want it to be as good as my old one, but now that I am 30 years older, I can mod it out, or kinda ratrod it. Of course every thing thst I google this site comes up, so here I am. Prepare yourself for stupid questions, and stupid stories from days gone by.
 
Welcome to the forum. Got any pics?
 
welcome to the forum also learn to use the search function and read what others have come up with on certain issues ... I ruined my eyesight on this forum and met a lot of great people in person too ..
 
Welcome, you will need this: http://vmoa.net/VMX12-Service-Manual01.pdf save it on your computer and print out a copy for in the shop.

I suggest reading some of the threads about trying to return to the road a bike stored for a time. You may recognize some of the same issues.

Here is another thread: New Vmax Owner FAQs....new members please read! RaWarrior has moved-on, but his thread still helps people get their bikes fixed. If you used the upper right-hand search function, on a subject concerning your problem(s), you're going to find info on it/them. Common issues are electrical, carburetion, second gear, and handling. With patience, proper tools, and by using the shop manual you now have, you should be able to solve anything. If you need to split the cases, but you choose not to do it yourself, member Damon in the Detroit area is about 200 miles away; member CaptainKyle is in Maryville TN something twice that distance, and Sean Morley in Derby KS is as-close as your local FedEx drop-off point.

Most members encounter carburetion issues at some point. Especially on bikes not ridden regularly, pilot jets become clogged. You can try chemical sprays and the 'peashooter' and the 'shotgun,' but if I suspect plugged jets, I drain the carbs to see what kinda crud comes out of each float bowl individually, and then it's 'tear 'em-off, & tear 'em-down.'

The 1st pic shows the starting enrichener pistons out of synchronization, the 'choke' function won't work properly. In this case, one or more of the pistons is probably frozen in the bore. Some of the parts for these carbs are no-longer able to be ordered from your friendly Yamaha dealer, so tread-lightly. This is one of the rare cases where you have to separate all four carbs, for access to the starter enrichener casting, which screws to the side of the carb. This is one of the pieces which is not available new from Yamaha! A good soak in your favorite penetrating oil is one way to approach freeing up stuck pistons. A 50/50 mix of ATF and acetone is a good penetrant, but as acetone readily evaporates, and is flammable, use a closed container and do NOT do it anywhere there is a pilot light, like a stove or a water heater. Flammable gases can travel dozens of feet to find a source of ignition!
VMax carb choke out of adjust..jpgVMax carb float area.png

The K&L kit here will save you significant $ over buying the OEM parts for the carb. I've used 'em for many years.
VMax carb kit.jpg

Two pairs is as-far as you often need to disassemble the carbs to clean the jet block brass jets. Note that the synch screws and the idle screw remain undisturbed, a big benefit. That is not to say that you don't need to re-synchronize the carbs after breaking them down this-far, and re-installing them. It just saves you the time, and possible screw-ups from an error during reassembly. Take lots of pics, from multiple sides, to see how things are as you tear them down, for ease of reassembly.
VMax carb pairs left and right.jpgVMax carbs disassembled diaphragm side.jpgVMax carbs disassembled for soaking.jpgVMax carbs.jpgVMax FloatLevel bowl off.jpg
 
Last edited:
Back
Top