MaxMidnight

As the shotgun improved the situation and #1 has improved it would seem that more work is needed on #3. If the measurement is taken at...

The breather is the mushroom doofa on the top of the final drive (well done for NOT calling it a differential! 👍:)) No idea the purpose...

Have added the attachments that I was referring to.

It would be helpful if you explained the symptoms you are getting when trying to start. Assuming this is a new problem and an issue is...

Static sag is how much the forks compress when the weight of the bike pushes down on the forks and also how much further they compress...

I'm no expert but probably not as many of the electrical components are designed to work with 12v. I have to ask...why would you want to?

Yes + fork oil Without wishing to state the obvious it will depend on your ability but yes, it is a relatively easy job to do. The...

They are original equipment and were used until the larger diameter fork tubes were introduced. Don't know the relative weight v. solid...

In terms of bang for buck all you need are decent springs my preference would be for a single rate e.g. Racetech. combined with their...

One other thought, can we assume the oil you use is for motorcycles and doesn't include friction modifiers?

Does it make any difference if the motor is cold, during warm up or at operating temperature? When my clutch started to slip it also...

I changed my gaskets because they were leaking around the half moons and it was worse after because I used cheap Chinese gaskets. I...

True and may be relevant if a bulb with a higher current draw was being fitted but we are talking about a LED bulb which, I assume, will...

As a LED light will have less current draw than OE then I don't see need or benefit adding a relay would bring. IMO there is no...

There is an issue with pairing an LED bulb with a reflector and lens designed for incandescent bulbs. In the UK it is illegal to do this...