Fire-medic's latest activity

Welcome, some reading for you, if you haven't already seen them...

Three members offer rebuilding services dannymax Carb cleaning/rebuilding @ BRC Carb Shop, 16 Taylor Hollow Rd, Ghent, NY 12075 email...

Some choices. Two inch tube, removable gas cap screws-on, but allows a 'push-through' of the gas dispensing nozzle to eliminate...

Here is a post from a while ago that I posted about just this subject You have to change the tank neck to accept a twist-cap. Some...

If you use the search function, you can find there are some ways to get that result. One used for those who have a Corbin seat, is to...

It gives the exhaust a chance to have the ability to allow one exhaust pulse to give a boost to the following exhaust pulse, so they...

Welcome lots of info for you here about your ride. Where in MI are you...

That's the resonator box, it is not welded-onto the header pipes. If someone welded the slip-ons to the header pipes, it would be a big...

I can personally vouch for Patmax, a guy with integrity, and lots of parts! I have dealt with him many times. 🤘👀

Good job on searching for the short.

Be aware, a scammer has been frequently on this website under different screen names, and email addresses. He says he has the part &...

Time to remove the carb jet blocks, and give the carburetors an ultrasonic bath. I suspect your pilot jets are plugged, 1 or more. Do...

The headlamp, what kind of bulb is in it?

The mileage should be nearly double that, so something is still out of sorts. Yes to how you posted, same thread, but another entry or...

I'm not a flow dynamics engineer but I cannot see where that would affect things.