MaxMidnight's latest activity

Are they removable? Unless there is a specialist supplier I'm not aware that you can. Assuming they can be replaced then perhaps a scrap...

Yes, there will be coolant in the hoses. Not sure why you need to remove them though. If the tails of the clamps are in the way then...

Use a length of thicker wall pipe instead (I used some heater hose) which is self supporting and easier to guide onto the spigot with...

According to this, yes.

As MrMax1985 suggest the white wire come from the stator. It isn't original wiring that is going into the connector but what is there...

Fork seals are 4PU-23145-01 and the bushing and the upper bushing 5EB2312500 and lower bushing, 5EB2317100 both available from your...

Whilst happy to be told I'm wrong, I think those circuits are actuated via the chocolate coloured wires. If one of those is going to...

It would help if you gave the year and model of the donor bike but I'm assuming the forks are 41mm diameter? Assuming it is a either a...

I'm assuming that they will be right way up forks of either 40 or 43mm diameter? Assuming that is the case then what would be the...