one2dmax's latest activity

The front necks on these bikes are VERY stout. You can take this advice how you wish and at your own risk but I have had many bikes that...

I don't remember the size off hand but I have several of them to chose from for $150 plus postage. But, you need to make sure the stem...

Flex the box itself. It's common for them to develop micro cracks which cause intermittent operation. Flexing the box can reestablish...

I have another one that has a squeeze lever on the handle to push the head around. Sort of like taking a screwdriver to turn a nut...

"Sidewinder". Can't recall who makes it. Handy to turn quickly if you have room for the fat head on it.

There are 4 forward engine mounts. Can you take a picture of each one? They used different mounts over the years to engrave. You can...

in the drop box the "new" means 90-07 while the "old" means 85-89

Kerker is discontinued by the way. Same for many other old popular products.

Mostly for mid 90's 750 virago's. I do have several on hand. NOTE, the need to have some material trimmed off the bottom of the fingers...

Between Kyles friend Max and what you have I would think a good system can be designed. The stock idea would be pretty slick and apply...

I have 2 or 3 sets laying around. The set for the nine's bike, the set that I have used from time to time on gen 1's, another gen 1 set...

Hello All! Let's start with everything (but the bike) is A-OK. I had an unscheduled dismount (crash) this last weekend while running...

I might have some for a gen 1 laying around here?

These systems are slip-ons and give no net benefit for increasing performance. They are lighter and more noise though if that is what...

You should be trapping much higher mph's even if your elapsed time is slow from a poor launch. The times you are are similar to what a...