Search results

You do have to pull the motor and split the cases. I do all the chain drive conversions at my shop but if anyone was confident to re assemble their motor I would just need the cases to do the machine work then mail them back with new components. The conversion comes with everything you need, You...

I am the originator of the chain conversion for the Yamaha Gen 1 and Gen 2 Vmax since 1985 and 2009. It makes your bike a hundred pounds lighter 2 inches lower no comparison in handling and mind boggling acceleration. Compared to a shaft driven V-max its like he shut his key off. You would be...

The frame brace doesn't really do anything the motor is one solid mass bolted in six positions in the frame. If you want to improve handling getting a set of 17 inch wheels is the way to go. You'll notice improved handling and have a better selection of tires. other than that a dampener is a...

I did that back in the late 80s I wouldn't waste your time it will make your bike slower. If you wanted to do it to be unique thats different it looks cool but kills the horsepower

If anyone is still looking to get a shorter kickstand I wouldn't suggest bending the kickstand. All you have to do is take the kickstand off the bike cut it at the bottom you can cut off an inch or so whatever you want it to be when your done and heliarc it back together its a really simple...

That is possible to do what you said it would be a few days of work and you would have to weld the bolt holes on the short side perfect so that it doesn't create a vacuum leak. Then machine the top of the intake making the hole big enough that you could center the supercharger on there. The only...

I make custom wider shifter pedals and make forward controls for the generation 2. If you don't want the full forward controls but just want it a little forward the same height or even a little lower I make made to order custom relocating brackets. I put floor boards on a few V-maxs you should...

1,400$ for the rear wheel machined to match your stock front wheel, 2,600$ for the a front back matching set. If your asking for the solid wheel not machined with any design I could do that for 1,200$

This is a set of gauges I make set in a machined from solid billet aluminum housing. This one in the picture is polished but you can get it chrome plated and it looks unbelievable.

Having a 18 inch rear wheel is the way to go because you have a much better selection of tires. I don't know what is available elsewhere but I make a beautiful one piece machined from solid billet aluminum 18 inch by 5.5 machined to match your front wheel. I also offer a two piece 18 inch wheel...

Hey Gent It is the stock length and we still do offer a modified 5 gallon gas tank. Its great to hear to from you and I bet you get a lot of looks, you have a real sharp bike.

Mad Max 250 wide tire kit is a 8.5 inch solid billet rear wheel machined to match your stock front wheel, this comes with an aluminum swing arm transfer case. Available for a limited time at the discounted price of 3,500$. This is the newest version of the wide tire kit much lighter and stronger...

17 inch wheel for the Yamaha V-max super light dutchman rear wheel. The dutchman matches your stock front wheel and works with all stock components. Very cool custom touch for any V-max especially if you want to drop weight and go fast. Two piece wheel precision machined for optimal performance...

203-574-7859 this goes for everybody with a V-max if you ever need help advice or want to talk I'm always here. Good luck David and safe riding

Hi David I have taken apart more V-max motors than anybody. I've disassembled those motors with over 100,000 on them and the rods and bearings are still good. The stock connecting rods are good, strong, and light weight. I use them in some my naturally aspirated 8 second motorcycles. I have a...

They're a piece of cake to rebuild but get on ebay they're just about giving them away. Just be careful to take a good look at the pictures but if you get burnt you can return it with no grief. That way you don't have to deal with any leaches trying to rip you off.

Hey Guys I don't know if anybody is still looking but I designed a set of forward controls back in 2009 for the gentleman in the picture. He was 6 foot 6 and he said the forwards made the bike very comfortable. I actually have a set in the garage going to be on its way to Brazil in the next few...

Yes I offer the 5.5" or the 6.25" and more options up to a 13" for the 360. With the 5.5" you can keep your stock components including your stock swing arm. We machine in to match your stock front wheel unless you request a different design.

These are a few pictures of designs we do. We've done dozens of designs but I would say the tuning fork is the most popular. The tuning fork wheels are on a generation 1 in the picture but we also make them for the generation 2 17 inch or 18 inch . The three spoke design is also nice and if you...

Hi Terry I noticed your post and I wanted to save you a little bit of chasing your tail. That cast intake was made by Bill Bushling a good friend of mine going back to 1985. He was a dear friend of mine and I would never insult him or his work but the casting company that designed the intake you...