Search results

Just took a ride out to Central Pennsylvania yesterday and closed the deal on my new 2013 Vmax . Got a good price and what made it not hurt so bad I got made the decision to get ride of one of my track KTM bikes that was still worth a lot of dough so that helped with the cost , plus Yamaha had...

Seems like most of the used bikes are just about the same price as new , for a extra grand or two why not get new . I seen the 09's were known to have problems with the oil pump . I have a FZ1 , KTM 990 SMR , KTM 690 SMC , Gsxr 1000 and just sold 2 of my sport bikes and this one may be next ...

Thanks for the link , I would just buy a new one , there are so many dealers out there with them I don't see a problem finding a new one at a good price .

Hey Guys , I have been selling off some of my bikes I have not been riding , I'm going to making the decision on a new 2nd Gen Mr Max . I really like my 2007 vmax , that bike just puts a grin on your face as you guys know . I still have one more bike to sell , its one of my supermoto bikes ...

My first gen 07 has a KTM 990 SMR supermoto , KTM 690 SMC supermoto , 690 Enduro R and a naked SV 650 to keep him company . Soon as the weather breaks in the northeast I hope to take a test ride on a new Mr.Max to see if I'm missing out on anything .

Do You Own A Old and New Max Hey guys , just at my local Yamaha dealer thats a friend of mine and he had just got a new 2013 Mr.Max in the showroom . I have had my eye on one but have not pulled the trigger yet . I have my 2007 that I am still improving with mods but not getting too carried...

Hey guys , has anyone done racetech emulators on there vmax in combination with progressive springs . I have done my share of for forks , looks like standard drilling out the drill out damping rod and weld up the rebound holes . Just wondering what spring on the emulator , blue or Yellow and how...

I just received my Fatdaddy from Jon the other day , I chose to go with a ME880 metzler . I am lucky to have access to a tire macine ... its old and you have to take care and duct tape the fingers that hold the wheel in place . I have done the zip tie with dirt bike tires but would be leary of...

I was down my buddies shop and grabbed the complete zx14 barke set up including switches and wiring harness leds . Bad thing is some one changed out the the levers to som engraved zx14 on them . Also grabbed the clutch side with harness and line ... just encase . I was looking at the new...

Will do on the dyno , my best friend owns a kawi dealer with a dyno . I'm not sure when I will get around to the swap . How well dose the kerker fit , I did see a post witht a user who dented up his pipe while trying to install ... the white tip jet coated pipe is purdy .

I was down my buddies cycle shop yesterday , was going thru one of the distributers and got 20% off cost on a set of 430 in black so I went with them in 12.5 and also the lowering spring kit for the front . I'm going to be riding the girl friend alot of the time so i think it should be fine . I...

I'm about 225 with gear and my girl will be riding with , I was either considering 12" or 12.5

Hi guys , I'm considering reworking my suspension on my 2007 , I have a nice pile of parts that are going on the bike but don't want to go to low on the suspension or have any scraping or rubbing . All my parts are not installed right now . Fatdaddy 18" with ME 880 180 Kerker K white tip exhaust...

Hey guys , I picked up a kerker exhaust and going to swap out the dragster ... eventually ... its really loud and puts a grin on my face ... LOL I'm sure the bike I picked up was a user on this site , Dave Lee ... it was a 2007 and have the dyno sheet 132 at UFO ... I picked up a Kerker K...

I picked up a pair of EBC front rotors from my buddies shop , I have a nice pile of all most new calipers , some R1 and R6 blue dots , Busa and my favorite a pair of ZRX1200 6 pod calipers... there brand new and seem to be the same bolt pattern as the busa caliper . I also have braided lines...

I don't have any brake up grade on my machine , the radial master will make a big difference , I am trying to decide how I'm going to do mine . I have a ZRX1200 master that looks a little more like the stock master but is designed to run a 6 pod caliper , I'm sure its a up grade from stock ...

Is the ZX14 a good upgrade for these machines ? I have a buddy with a kawi dealer and there is a set sitting on the ground .

Hey Guys , I have a 2007 Vmax , I'm planing on a front brake up grade , I have a set of R1 calipers , steel braided lines . I'm looking at wave rotors either the EBC MD2074cc thats the stainless wave says it will fit . I was just concerned seeing a few post about the floating waves have...