Search results

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. R

    De-winterizing

    Hi -got it running and now I will share my stupidity as it may help someone else and you guys have been very helpful and patient with me. I'm embarrassed to say a very stupid thing that I forgot about. I had covered the air intake with a plastic bag in the Fall as I had just washed and re...
  2. R

    De-winterizing

    Yes took all the gas out including draining the bowls and not even an improvement.
  3. R

    De-winterizing

    Hi - no it's not ruinning but I have verified it's getting a spark. So I am out of ideas - needs fuel, ignition and compression. it's turning over, I can smeel that the fuel is getting through and have now verified the plugs are sparking so.........?????????
  4. R

    De-winterizing

    Yes, I have done that now and seems to be sparking.
  5. R

    De-winterizing

    HMMM - all old gas syphoned out and refilled with fresh. Changed all the plugs now too and same results. What's the next step?
  6. R

    De-winterizing

    Yes all the cables are tight and I did try bump starting to see if that helped break anything free. It's possible I might have put too much Stabil in the tank. I don't know how to test the plugs, all ran fine just a few months ago with never a problem or hesitation.
  7. R

    De-winterizing

    Can someone help me pls. I pulled the bike out the other day and had the fuel stabilizier in it, drained the float bowls and had the battery charging over the winter - normal stuff and usually it would catch on the second try after the long winter. This year can't get her to catch. It cranks...
  8. R

    Performance Issue

    Thanks for all the help. Maleko nailed it - I had ordered 2.75" openings and the engine definitely likes a bit a back pressure. I got new baffles at 2" from Mark and made an extra 6 HP over the only 1HP I had with the larger openings. Looks and sounds and feels great. Morley's kit will be...
  9. R

    Performance Issue

    Purchased a set of Marks 4-2 12" with 2.75" openings. Happy with the pipes and happy with the service but can't seem to find any more power and was hoping someone might have an answer. Stage 1 Dynojet done when the pipes were instaled otherwise stock - except K&N and Y tube removed. The good...
  10. R

    Wanting more exhaust volume

    How about performance? Is there any place to see the dunos for various systems? I've seen the sheet for Holeshot but not Marks or any other brands. The sound is nice and likely with the less back-pressure, they'll all give you some sort of gain - there must be some differences. I'll bet the...
Back
Top