Search results

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. veebooster

    HMF Carbon 4-2

    They're great on a max. HMF haven't made them for a while now but there are lots out there. I have a set on my bike. They were around $1000 CAN new. Dale
  2. veebooster

    Canadian Bike

    Haha yes that's so true. But only the carbon fiber editions.....
  3. veebooster

    Canadian Bike

    Mine are 170 mikuni...Ontario
  4. veebooster

    Exhaust pressure

    Ditto maxcruiser.....ride!
  5. veebooster

    Official VMAX Owners Recipe & Cooking Thread

    You guys are killing me....we have to get some warm weather so I can break out the smoker!!
  6. veebooster

    New Exhaust Carb Tuning Issues

    Check to make sure your stage 7 needles are moving freely within each carb. Dale
  7. veebooster

    Front cylinder leaking oil

    I've got a leak in the same spot. Doesn't leak much but is annoying. I'm 95% sure it from the top of the stator cover as mentioned. I've never had that cover off (2002) I can't see it bubbling out though. Dale
  8. veebooster

    Famous 2009 Coming to Morleys Muscle

    Couldn't think of a better home for that bike! Dale
  9. veebooster

    Backfire and popping out of right side exhaust

    Also check that your needles/slides are moving freely.
  10. veebooster

    shifter lever

    If i remember right the manual says the shift rod length is 30-34mm. That doesn't give much adjustment. If you get outside of that range the lever angle may make if it more (or less) difficult to shift. You can get more by pulling the assembly off and adjusting at the shifter itself. I had to do...
  11. veebooster

    2016 Toronto Spring Motorcycle Show

    Yup. Money grab by government everywhere they can get it.
  12. veebooster

    2016 Toronto Spring Motorcycle Show

    Since this area's been so quiet I'll post something: April 9 & 10th International Center http://motorcyclespringshow.com/overview/
  13. veebooster

    Dyno'd the bike today.

    Good info guys. You're both similar to mine although I haven't done any dyno work. 155 mains stage 7 needles at 3 clip. COPs and Plugs at .038. Runs smooth there and I'm leaving it! Trauma I don't know how you get yours to run at 1.5 clip - disregard , I see now you've got FP needles. Dale
  14. veebooster

    Ignitech installed and did Coil On Plug conversion.

    The one that Thor posted above. It shows peak advance at 3000 rpm at all iap. Dale
  15. veebooster

    Ignitech installed and did Coil On Plug conversion.

    Guys, help out an ignition dummy - why would you want a higher advance at lower rpms? I would naturally think that advance should increase with piston speed (rpm). I must be missing something. Dale
  16. veebooster

    What did you do to your Vmax today? Part 2

    I think I got it! My vmax is running like new after new cops, plugs, and fiddling with a sticking needle. I've been riding my FZ09 alot and it's a great bike but the vmax is just something special! Dale
  17. veebooster

    Ignitech installed and did Coil On Plug conversion.

    Now that's interesting! Mines all over the place. Dale
  18. veebooster

    Muscle Shop - Going to Europe

    Awesome trip! Have a great time Sean. Dale
  19. veebooster

    Strange symptoms...

    Just remember the old rule " rich condition gets worse, lean gets better"
  20. veebooster

    Stage 7 needles

    I did. Looks straight.
Back
Top