Search results

Have you done a "shotgun" procedure on it? Ive have REALLY good luck doing a shotgun, while removing PAJ#2, for a full blast of air. Also FYI, people in the past have destroyed coasting enricheners, buy just spraying carb cleaner in the wrong spot. https://vmax.lvlhead.com/tips/shotgun.htm

What year bike ( Gen 1 vs gen 2)?

Shinko verge 011, in stock sizes. Many people will say best all around tire available for the Gen 2....including price. Instead of breaking loose, I tend to wheelie with mine.

Just FYI this post was from 2018.

https://www.vmaxforum.net/members/ksmax.16514/ https://www.facebook.com/mikemp.vmx/?show_switched_toast=0

I believe that its come from people on this forum that have dyno'd before and after. Now that being said, will 10 hp make that much of a difference, probably not, but if your out running other Vmaxxers, yes 10 hp does.

Thanks

I got mine from Mike Kemp. It is a plug and play set up.

Thanks for the Info Dustin, also great info.

I think your running a bit rich, back off all 4 pilot jet screws 1/4 a turn, see what happens, and possibly 1/2 a turn. Sounds like its rich and loading up.

Just remember that the Gen 2 speedo is roughly 7% off.....as in it reads too fast. On my speedo healer, I had to put in 6.7% to get it to read accurate.

Sopunds like a pilot jet is clogged. A shotgun is a simple procedure to clean them out. Ive had better luck when doing a shotgun, with removing PAJ#2 for a full blast of air. Here is how to do it. https://vmax.lvlhead.com/tips/shotgun.htm

The factory service manual calls for Yamaha M1 Fork oil. What I found on the internet its 0 weight. https://www.revzilla.com/motorcycle/yamalube-m1-suspension-oil?rrec=true&sku_id=1589977 I dont know if there is a suitable replacement?

LOL, I bought one from Sean for the 07. 44 lbs shipped. No bushings, no bearings, no tire.

Never seen it, never heard of it.

Looking in the manual there is a test coupler to tie into the ABS system and read the DTC's. Test coupler adapter 90890-03149 that is disco'd. I wonder if it would be hard to make? I just asked Sean, and he said that he used a simple jumper (the looped section), should be green wires with...

Have you put it into the diagnostic screen to see if there are any trouble codes?

UFO made very few things.....just rebranded a lot. The UFO exhaust was actually voodoo. The maxdaddy wheel, was actually made by RC components. Doesnt look like marks performance exhaust as well.

Thats not a voodoo exhaust....although it might have a voodoo can on it. here is from the voodoo website. https://www.voodoomoto.com/SearchResults.asp?Cat=812672 Its not a hindle exhaust.....although the rear pieces are curved like it. The front pipes on the hindle are stepped. Hindle=Brocks...

Can you post pics? I'm curious now. Ive havent seen anything without the stock rear headpipes on it. I'm never to old to learn something new.