Search results

I already did a write up on the banshee mini horn install i liked it compared too stock horn. Needed another project to do on bike this fall so decided to install the Denali sound bomb i went with the split version compressor and horn separate just run your air line to horn and wire harness to...

Looks about right are those sae smoothing 5 results most realistic numbers or std results which show higher numbers. I also herd dynojet did a software update to there dynos and now the results are more realistic for dyno hp results so numbers are down compared to there past years results. Tim...

Were you live how many Vmax would be on the Islands.Digital Guard Dog makes a plug and play key less system also have a gps tracking module that works with there system. Or just use what ever gps tracking system that would work in your area. Cant see any one stealing your Vmax if you live on the...

Once you get the Guru reflash for cat delete then you can disconnect and remove all your cables and even the servo motor save a little weight. Also have him disable your AIS system. Here is a picture of the servo motor removed.

I really like mine on my 2019 very nice and secure nice quality pegs. Plus you cant better customer service than Jim provides.

This is a key factor for tank install the front liner here you can see what i cut out for tank to position proper. You have to take out the vent the rubber under plastic cable harness and the rubber the rubber you see in picture.This area is a very tight fit so tight that with me installing two...

Since i have the Guru reflash i took out that exhaust motor so it let me lift up the cable harness made positioning the rear liner easier with motor in place the cable harness was basically sitting on rear liner so you could not push liner up for proper fit

I did not run my seat release cable like they say too in directions as you can see in pictures i ran it under the last frame support had to grind a bit on front on support for cable to fit. If i ran it up beside tank it would not let me raise back of tank high enough to frame and liner would not...

Spent alot of time figuring out the 24.5 liter tank install. Took my time and got it to fit nice. I installed the tank first then installed frame no problems lining up frame bolts did this install by my self. The front plastic liner is important how it fits. Took out four rubbers from front were...

Couldn't wait pulled my stock tank out going take my new tank and rear frame down to my friends shop to transfer everything over. He installed his with no fitment issues. Will update how it turns out and also let everyone know if i find what causes fitment issues when its time to install rear...

No updates yet once the cold weather sets in then I will start the install. Still have a few riding days left.

G2 Street Bike Cams for Yamaha You can buy there high quality aluminum throttle tube with delrin bushings then pick what ratio cam you want

I would check first to see if indeed on your tank some of the excess welds are causing a fitment problem. I just ordered mine so i wont see it for awhile. Like foreverblue mentioned each tank could slightly fit different since its welded by hand and not done by a machine. Wander if the rubber...

I was not there when he did the install I just went down to see it when it was all finished. I know he also mentioned about the rubber supports being shaped down for proper fitment. The tanks are welded by hand but the aluminum cut panels should probably be the same they probably have them all...

Once he sends me a picture of how his liner fits i will post it. As far as i know he only smoothed out the weld on left top side of tank that was keeping the tank from going more forward. He said if he wanted the liner to fit 100% on the one side he would have smoothed out the welds on tank...

Just got back from checking out my friends 2020 install of the swab 24.5 litre tank. It took some time but he got his rear fender liner to fit 99% perfect no cutting no modding. Also used stock bracket for rear brake fluid and stock fuel tank breather hose. One of the keys to fitting it to frame...

Sorry thought you were talking about socket to remove rear wheel axle