Search results

Thanks to everyone for all the great suggestions....................I also found a YouTube video which showed a socket being placed in the piston and then a rod along side the socket inside the piston and then the rod would be rotated and cause the socket and rod to lockup against the...

Tried searching forum for brake calipers and came up with everything but.............I'm looking for recommended methods to the remove the pistons from the caliper body............several of the pistons are locked in with the o-ring partly sticking out...............is there a tool for removing...

I need the starting circuit safety relay, the one under the headlight, 4 pole, with the built in diode, thanks

Where can I buy one of these? thanks

Excellent point on periodically starting the bike.............I always allow it to run for 10-15 minutes but have never thought about condensation forming internally.

My bike has been in storage all year and I periodically put a battery charger on the battery to keep it charged and start the bike every 2-3 months. Last time I attempted to start the bike, the headlight came on and when I hit the starter button everything went dead, nothing. Got around to...

I prefer Mahle oil filters..............I use the OC 575 on my bikes............German made and very good quality according to various reviews.

I've used this one for years and have had no problems with it and I like being able to select oil filters of my choice...................https://www.ebay.com/itm/Oil-Filter-Adaptor-Plate-Cross-Bar-85-95-Yamaha-VMAX/261495448083

What does it feel like to ride at 175 MPH....................can you see a light at the end of the tunnel?

According to my wiring diagram the rear lights are not used as running lights like the front..............therefore the rear lights are used for signaling only

Thanks for all the great information..............I don't have much luck in locating this type of detailed information when trying to use the search function and to find this type of information...........thanks again

The wire is deformed beyond it's yield point for the wire and once it has been moved beyond the yield point the wire will not return to it's original shape which is this case is a straight piece of wire. It does have to be over bent in order to get the ends of the wire to match the original...

My cooling manifold where the drain valve is located is leaking a small amount at the Drain Valve and also leaking a little where the manifold goes into the block................I assume the block fit up is with a o-ring and can be replaced but not sure about the Drain Valve...

Did you get the European drawings?...................you made no mention of them............thanks

What year is your bike.................I have a 85 and a 93 and neither one has guage lights in "P"

What years does the drawing that you posted cover?

Decided to share the joy of new drawings.................attached are the European drawings for your review..................I need to know what the order of the ignition coils are on the drawing you posted so that I can match colors to the coils...............I would appreciate your review of...

Not sure who is and is not aware that the local UPS store usually has colored 11 x 17 printing available for printing drawings in pdf format. My local store charges $0.59 per copy and the results are excellent and it normally only takes a few minutes to print them on the spot. Save the pdf...

I posted the latest Vmax drawings that I have been working on for my 93 Vmax on the Electrical Forum un der " New Electrical Schematics Attached for My 93 Vmax". These drawings are now complete(except for errors I didn 't catch) and shouldn't suffer too many more revisions. Feedback on the...

Forgot to attach the two 8 1/2 x 11 drawings for Sht 1.................trying to cover all the bases by providing a 11 x 17 formatted drawing in pdf and two 8 1/2 x 11 drawings in pdf format so that people can end up with a 11 x 17 drawing using a letter size printer. LH and RH in the drawing...