Search results

I emptied them into a steel container because that's all I had but the gas looked pretty clear. I was hoping it was just some **** I could clear out:bang head:

My pump properly pressurizes the lines, because it stops clicking and starts really easy (read; one to three turn overs). My floats getting stuck sounds kind of plausible other than the fact that it gets issues outside of the float tuning range? 5k+ rpm? I'm not entirely sure but I might try the...

I just had the carbs synced about a week ago, would messing with the AF mixture screws move it out of sync?

I ran out of gas with my max yesterday (not too uncommon) but after I started it up again it seemed as though I didn't get much power past 5k rpm or half throttle, and when I go over I hear alot of popping but no power. With lower throttle and lower rpm I get the same amount of power and torque...

Just looked at the exhaust, I have 9 discs on each side. Not entirely sure on the A/F mixture screw but I believe they are between 2.15-2.5 turns out on all the carbs. Kinda scared to pull apart my carbs to get the main jets out because I don't have a sync tool and this is my first mechanical...

When I cruise with my VMAX around 5k-5.5k RPM it seems like I need to give it more throttle than I should to continue to hold that speed. Also when I drop out of V-boost it feels like I lose far more power than I should coming out of it. At 60mph its fine its just around 75-95 in 5th gear that I...

I've been running carb cleaner through it and fixed my electrical system and that seems to have cleared up the lower rpm stumble. But I still get that tst tst sound when choked too far and the bike doesn't give me much power at around 5 grand with under 1/4 throttle. Any ideas? I have stage 2...

When I throttle over 1/4 to 1/3 and the bike is under 2500 rpm it will stumble and almost make a tst tst tst sound while giving zero power beyond the amount it starts to stumble at. I've also noticed that it will do the tst tst sound when i go past about 1/3 choke. Any idea what it could be?

A few days ago I was driving home on my vmax and I pulled in the clutch to coast and noticed the motor had completely cut off. I did this a few times noticing that the rpm wouldnt even stop at idle and would just completely turn off and not even hang at idle. When I got home I fiddled with the...

What kind of grips do you have and what bar end mirrors? Are there any tricky installations or anything I should about installing bar end mirrors?

I dropped my bike today :sad2:, but it wasn't as bad as I'd thought it would be. But I do have one issue: the mirror threads on the right break reservoir broke off with the mirror (I guess it was tougher than I thought). Any idea on how to secure the mirror back on? the threads left on the...