Search results

Thank you very much for your recomendations CaptainKyle !!!

Hello,my ´86(48.000 miles...) needs a valve gasket replacement due to some oil leackage throughout some areas of the cylinder heas...I would like some tech advise ,I have to replace the valve cover gasket,my worrys are; *Do I have/should to replace the rubber/washers of the valve bolts...

🤣🤣.. problably not has the problem of the oil level during hard acceleration..😂

Sorry 99YamahaVmax,I´m with Fire-medic..it is a very good good recomendation of replacement,is it expensive?,well..it´s a fuel line...it is just an opinion..🍻

..same as Maleko..please share the tips or post for future use by other...specially the good tips!!

Pressure sensor ok...(well,looks like it was not" firmly attach" ..the diference now is that,I can disconect the servomotor(keep the Vboost always open..)nad the fuel pump does not "run all the time",when I start the enguine...I will made a test ride....

Thank you *MaxMidnight,Pressure Sensor according to the manual,isn´t it?..I will check how it works according to the manual.. I will foward the investigations of both parts.... 🍻

Sorry *fire-medic but in my previous answer I only had "the first line of your comments" The Ignition Advance Unit is "Inside" of the Ignition Control Unit(CDI),isn´t it?... Buff,I will take a look at the Vboost Control Unit...see how it looks inside.

Thank you *Fire-medic. I think so..but what its extrange is that before I did not have any "issue" ,fuel and controller were "working" even whithout the buterflys removed... I just want to eliminate parts involve in this failure..my first thought was the fuel relay also....and since my last...

Hello,I have a problem since I install back the Vboost "buterflys" ;Yamaha year 86(USA ,not CA model) ,KerKer + Dyno7. Problem; The bike had the controller and servomotor installed and "conected" before I install the "Vboost hardware",no noise before,(before the installation,without the...

Maybe it helps..french´s frame v-max(not sure the year,I think 1996 and up...)..

..welcome and pictures please!!🍻

Thank you Fire-medic..very good information..

Very welcome !! ...any the experience that you can share is valuable....

Good Job ...very useful!! I have a daut about; "M. Starter Relay: Changed in 1990 to a higher resistance coil. 1985-1989, 36Y-81940-00-00, 1990 on= 3UF-81940-00-00... Wiring completely changed but it is possible to swap with a jumper wire added in on the later years." Do you have details of the...

uuuhh..did you buy it new?...maybe a "aesthetic inprovement"from last owner,it is esasy to check with the part number that Sean mention...thank you for the comment 👍

Thank you for the information Sean!!🍻

Hello; Please,anyone could tell me in what years the VMax´s install the black muffler´s? is a special edition? Are they interchangeable between 86 ´til 07? Best regards.

Hello,sorry for my informatic limitations,but after download the font(Gen 1),I only get a page in the file with a repited "The quick brown fox...",what will I need to do to get to the information? Thank you for your help....

Hello from Spain; There are some Youtuve videos where only the diaphragm is replaced(rubber part only),it works for me..buy only good quality diaphrams..