Search results

Your gonna love it. Just make sure that after you install, that you use windex or similar to clean the exhaust of your finger prints. You may not see them before start up, but they will show up after the heat is present. Enjoy your new bike.

I should have mentioned that I am running Marks 4-2 exhaust. I am running the stock PAj2, #170

I am at sea level in FL and here is how I have my Muscle kit set up. Mains: 157.5 Stage 7 needles with clip on 4th from top A/F screws about 3.5 - 4 turns out Morley springs Slides not drilled yet. I am still a little sluggish on the 2k - 3k rpm's so I will be making some changes. Above 3k...

Absolutely!

Yes, putting a couple wraps of teflon tape on the threads of your bleeders is a must.

Hey Ghost, are you going to use a Morley jet kit? Well spent $$ IMO

Garrett, just dont fill the master up until it equalizes. If you dont push any fluid out of the tubing, then you wont need to add any fluid. You can just work the same fluid back and forth and not have to add any new fluid.

If I remember correctly I am using a #6 or # 7 1/2 lead shot.

Re: " brownie run " 2010 I am really jealous of you guys going to BR10. Next year I will be there!!

I have the solid mounts and also have the lead shot in my bars. Very happy with the results. The lead is also allot cheaper then the bar snake.

I have 3+ quarts of quality used drain oil that can be yours.

In my opinion, SMM are the best upgrade for the $$$

Does anybody know what size the screws on the float bowl covers are?

Here ya go Ron, I have this exact tool is has made the removal of these butter screws very easy and I have not had a single problem removing them. I use this to loosen the screws that hold the rack together and for the float bowl screws...

Hey Brian, take a loom at my post of how I bled my brakes. http://www.vmaxforum.net/showthread.php?t=12103 It is most likely the micro bubbles that are unseen with conventional bleeding. With the clear tubing connected to the bleeders, one is able to see the micro bubbles coming out of the...

Look on here http://vmaxoutlaw.com/main.html Look under Vmax tech info, and there is a chart under the Documents and specs, Then Vmax Full power guide

My Marks fit on very nice. It is a well made exhaust and is easy to install. I would make sure that you use new exhaust gaskets though.

Glad to hear that you are okay. I have that fear as I sit at a light. I feel better once I have one stopped car behind me.

I have my bars filled with bird shot, in hopes of dampening the vibes.

You could always get the amber led's to install in the scoops. Look here: http://www.superbrightleds.com/