Search results

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. Z

    Poor Idle Continues (Voltage Problems?)

    I have been having some issues with my bike over the past few weeks and posted up in a couple of threads about my issues. After getting a bunch of advice from many great people I tested my stator and r/r and didn't find any problems. I replaced my battery but still seem to be having the same...
  2. Z

    Voltage When Fan Is On

    Thanks maxrom
  3. Z

    Voltage When Fan Is On

    How much voltage drop is typical when the fan kicks on? Thanks
  4. Z

    charging voltage

    I had a very similar problem only a week ago. I to checked my stator and r/r, and both are okay. I did all the mods to the wiring to increase voltage and things improved. It turned out that the main problem was the simplest culprit...the battery. My PC680 was on its last legs, so I replaced...
  5. Z

    Bike Problems

    Well, at this point it looks like my r/r and stator are all still good (conducted all the test and the readings look promising). Two places have now told me that my PC680 is not up to snuff...everything is pointing to a faulty battery. I have been doing some research on batteries and I think I...
  6. Z

    What Is This?

    Well Sean, I certainly am not going to disagree with your expertise, but all I can conclude then is that the previous owner of my 1997 V-max replaced the r/r with an older style unit at some point...why he would do that makes no sense to me:confused2:
  7. Z

    What Is This?

    I think the fiche diagram is very misleading. From what I understand from 1985 up to and including 1997 models used a shunt style r/r that was grounded to the bike through the back of the r/r itself and there was no ground wire coming from the r/r unit. (this style was prone to overheating and...
  8. Z

    What Is This?

    My bike is a 1997 and the r/r is grounded at the r/r backing plate...so that can't be it...unless, the factory installed the ground wired in 1997 but not the upgraded r/r:confused2:
  9. Z

    Bike Problems

    Okay I am slowly moving forward on all the excellent advice and opinions people have given me...and I must say I am truly grateful for everyone taking the time to help me. I have removed the battery and it is currently at a local motorcycle shop being checked out (I took it to Canadian Tire and...
  10. Z

    Bike Problems

    I also thought this black wire might be a disconnected r/r ground, but once I removed the r/r from its hiding place I realized that my bike does not have the newer 'finned' r/r but instead has the older version. This kinda threw me because I read in a couple of places that 1997 and up had the...
  11. Z

    What Is This?

    I am currently in the process of figuring out some electrical issues I have been having and in the process I came across a black wire with a white connector attached to the end that doesn't connect to anything. It is taped into the harness along side the red wire that connects to my r/r (which...
  12. Z

    Bike Problems

    Thank you for your advice. I will change my practice. The battery is a PC680 and the date code makes it an 08. I just went out and bought a better battery charger. I think my old one is not appropriate for charging bike batteries (10 Amp). I think I read somewhere that I should charge a...
  13. Z

    Bike Problems

    Update: I just went out to see if it would start and it did. I realized that when I tried to start it before after it had stalled the fan was running because the engine was hot after the ride. So I shut the bike off, and turned on my fan over ride switch and sure enough the bike wouldn't start...
  14. Z

    Bike Problems

    Okay here is my story. I have not been riding my max a lot this season but I was going out to the garage to start it up once a week. a few weeks ago I decided to go for a ride but the bike battery was dead. I figured that when I started it each week and only let it run for a short while I...
  15. Z

    Muscle Seat Thread

    I finally finished my tank cover to match Sean's G2 designed muscle seat. Thought I'd post a couple of pics here to show off Sean's awesome seat and the matching tank cover. Thanks Sean...you make a great seat!
  16. Z

    Turn Signals - Strange Flashing

    Okay, I'm finally getting around to fixing this flashing problem. Going to try to install some resistors and see if that helps. What size resistor will do the trick...thoughts?
  17. Z

    Clutch Noise?

    Okay, I'll try to do that this weekend. Thanks, I'll try to get a video up to get your thoughts on what I hope is just my vmax paranoia. Thanks for your opinion. Didn't think the tire change would have messed with anything but it is the only thing I could think of that I did lately.
  18. Z

    Clutch Noise?

    I'm even thinking that maybe I have done something myself to the bike. I replaced the rear tire a few days ago. Could I have misaligned the gears when reinstalling the rim which effected the starter clutch and so on? Man I am so fixated on this freak'n noise!
  19. Z

    Clutch Noise?

    How certain are you? I don't mean to question your expertise but it just seems not right to me. I can actually feel it in the foot pegs now. Sounds like it is growling and goes away immediately once I pull the clutch lever in. I'm so paranoid that my clutch or transmission is going.
  20. Z

    Clutch Noise?

    I seem to have a very subtle noise coming from my clutch (or at least it sounds like it is coming from the casing). Never noticed it before so I don't know if it is normal or something is wrong. It sounds like a very faint rattle. It disappears when I pull the clutch lever and also seems to...
Back
Top