Search results

New battery. Starts up strong. Mileage = 5,000 Price still $11,900

Registration renewed, expires December, 2017 Clean title in hand. Oil just changed. Mileage = 4,400 Price still $11,900

Bump Current mileage is 4,200 Current price is $11,900

Bump, and price lowered to $11,900 Current mileage = 3,900

Bump, and price lowered to $12,700 Current mileage = 3,800 At least 50% tread left on both wheels

Bump, and price lowered to $13,400 Current mileage = 3,700

2013 Yamaha Vmax Excellent condition 3,000 miles, but that will change, as I am still riding it Upgrades: Vance-Hines CS-ONE Full Exhaust: $1200 parts 4-2-2 Includes Two 2-1 collectors, Two slip-on mufflers and all required clamps and springs, already installed ——————— Corbin Front Saddle...

Itgoes, Thanks. If I am looking at a bike on the showroom floor, can I see the ECU? If not, how much effort (which parts need to be removed) to see if there's a sticker? Brian

I am considering getting a 2014 Gen 2, from a dealer in CA. He said that the owner died, and the bike is on consignment by the widow. The dealer says that the bike has been flashed. Is there any way for me to tell which flash was installed? Brian

I read thru this whole thread, and I couldn't find the spec for the replacement bolts. Sean Morley was extremely helpful to me in this project. I found that the correct spec for replacement bolts is Stainless, M8 x 1.25 x 25mm long I was able to do this job in under 15 minutes, as my stock...

Well, I purchased #33 seal. I took off the rear wheel. Looking at the streaks, path, and consistency of the grease, it looked as if it wasn't final gear fluid that was leaking. So there was no need to disassemble the final drive to install #33 seal. I cleaned some excess grease from the...

OK. Thanks. I'll try replacing #33, and let you know. Brian

I'm having a similar problem. I have a 2000 Max with 40,000 miles on it. About 5,000 miles ago, I started seeing grease or oil on the grey dust cover, then splatter on the wheel. See attached parts diagram. I first added two new #27's. No change. Then, I waited till I needed a tire...

Simple question, but a true pain in the butt...... Every time I have to take the airbox off for anything, it is a pain to reinstall the breather hose back onto the crankcase. I can't get my hands in there. Any simple suggestion, or simple mod to help with this? I've been riding around...

How to remove carbs, main jets, and set float levels Here's a PDF file that you can download. The photos & text are formatted for easy printing, so you can have a hard copy to look at while you work...

Xtreme noobie question if they are off, how do you adjust the floats?