Tail Light Options

mabdcmb@yahoo.com · Mar 12, 2009

So, I hate the tail light on my bike. It's disgusting. I have found a few options on ebay and the web.

Monster Maxx
http://www.monstermax.com/Solid brake light Vmax tailight.html

I thought that this was an interesting tail light that may fit the Vmax. Anyone ever try it?

http://cgi.ebay.com/ebaymotors/Hond...ryZ35598QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

I've also seen this on ebay and many similar to it:
http://cgi.ebay.com/ebaymotors/Side...ryZ35575QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

I would like to modify it to look like this one, below. I often see another tail light on ebay that looks just like this one but is a little bit cheaper from "the hub". Not sure but it looks like they are bending the inner fender and mounting the new tail light to it.
http://cgi.ebay.com/ebaymotors/LED-...ryZ35598QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

And the last is from Motorycycle mods
http://www.motorcyclemods.com/

Anyone have any of these tail lights? Please post your opinions/experience on fit, finish, wiring, and overall apperance.

4gasem · Mar 12, 2009

There's other threads on this subject!

Here's mine. It's the M/C mods one. SUPER easy to install and looks and works great.

Chris

PATMAX · Mar 12, 2009

Just got popped Sunday for the new Florida "horizontal" license plate law. ( well, I was stopped and warned, deputy said it was a 1,000 dollar fine) I have the vertical license plate holder that mounts on the axle and has the LED stop and illumination lights. I am now looking for an axle set up in horizontal. A co worker set me up with a Dennis Kirk that I may be able to modify. Anyone else running a similar set up? :confused2::damn angry:

KJShover · Mar 12, 2009

PATMAX said:
Just got popped Sunday for the new Florida "horizontal" license plate law. ( well, I was stopped and warned, deputy said it was a 1,000 dollar fine) [/quote]

Glad you just got the warning. I always thought lisence plate rotation laws were ********, I went rounds with my Sgt. about them. He loved them cause it gave him another excuse to pull somthing over. But its another state revenue generator for some states.

Gets me thinking though, What if the bike was made that way? would it be grandfathered in? My chopper came from Daytona Custom Works and that was the plate bracket they put on it.

*back on topic*

I'm running the LED that seems to be in the eBay seller's bottomless pit of "last one left" that sometimes preceeds the description.

http://cgi.ebay.com/ebaymotors/LED-...5592932QQptZMotorcyclesQ5fPartsQ5fAccessories

Buster Hymen · Mar 12, 2009

[email protected] said:
So, I hate the tail light on my bike. It's disgusting. I have found a few options on ebay and the web.

Monster Maxx
http://www.monstermax.com/Solid brake light Vmax tailight.html

I thought that this was an interesting tail light that may fit the Vmax. Anyone ever try it?

http://cgi.ebay.com/ebaymotors/Hond...ryZ35598QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

I've also seen this on ebay and many similar to it:
http://cgi.ebay.com/ebaymotors/Side...ryZ35575QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

I would like to modify it to look like this one, below. I often see another tail light on ebay that looks just like this one but is a little bit cheaper from "the hub". Not sure but it looks like they are bending the inner fender and mounting the new tail light to it.
http://cgi.ebay.com/ebaymotors/LED-...ryZ35598QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

And the last is from Motorycycle mods
http://www.motorcyclemods.com/

Anyone have any of these tail lights? Please post your opinions/experience on fit, finish, wiring, and overall apperance.

Lankeeyankee on this forum makes one. I don't have a picture of it but he might post one if he sees this thread or you can PM him.

nightsmith · Mar 12, 2009

I have the motorcyclemods one too, and I couldnt be more pleased.

I think it looks great. and it was quite simple.

lankeeyankee · Mar 12, 2009

This post is not pushing to sell a product I make.. I am just posting a few pics from members who have the OEM Fender Tail / Brake Illiminator. from me.

gleno · Mar 12, 2009

KJShover said:
PATMAX said:

Just got popped Sunday for the new Florida "horizontal" license plate law. ( well, I was stopped and warned, deputy said it was a 1,000 dollar fine) [/quote]

Glad you just got the warning. I always thought lisence plate rotation laws were ********, I went rounds with my Sgt. about them. He loved them cause it gave him another excuse to pull somthing over. But its another state revenue generator for some states.

Gets me thinking though, What if the bike was made that way? would it be grandfathered in? My chopper came from Daytona Custom Works and that was the plate bracket they put on it.

*back on topic*

I'm running the LED that seems to be in the eBay seller's bottomless pit of "last one left" that sometimes preceeds the description.

http://cgi.ebay.com/ebaymotors/LED-...5592932QQptZMotorcyclesQ5fPartsQ5fAccessories

Click to expand...

Hey KJ is that a big number plate or is it the angle of the photo that makes it look that way? What are the measurements of that license plate?

dannymax · Mar 13, 2009

Here's a pic of Lankee's reflector conversion, it's a quality unit, plug & play and looks great IMO. The under fender LED is from Exactrep. Please ignore the orange 'lollipops' they are now clear lenses, and a little less obvious!:biglaugh:

KJShover · Mar 13, 2009

gleno said:
Hey KJ is that a big number plate or is it the angle of the photo that makes it look that way? What are the measurements of that license plate?

It's just the angle. Up here MC plates are 4"x7"

spyder13 · Mar 13, 2009

I have the one that is the 4th one down on your list. Very good quality. I have to very tough too. I say this because I got hit in the rear and the bike was wedged on the car bumper between the bike tire and the lisence plate frame assy straightened out and resoilder wires Frame does not have a scratch on it.

paulibiker · Sep 20, 2009

I hate to post to an old thread, but how do you get ahold of Lankeeyankee? He does not receive PM's. Just wanting more info on his taillights.

THANKS Paul

SteelerBike · Oct 18, 2009

4gasem said:
There's other threads on this subject!

Here's mine. It's the M/C mods one. SUPER easy to install and looks and works great.

Chris

Does the M/C mods tail light come with the license plate light?

gamorg02 · Oct 18, 2009

no it doesn't steeler, but u can get those black LED license plate lites off of ebay which will solve that issue.

Redbone · Oct 18, 2009

+1 to Garrett's comment, no dedicated white light for plate. Here is a couple pics I took with no lights on in basement but tail light lit.

SteelerBike · Oct 19, 2009

gamorg02 said:
no it doesn't steeler, but u can get those black LED license plate lites off of ebay which will solve that issue.

How do you power the plate lite? Do I run a lead direct to the battery?

gamorg02 · Oct 19, 2009

run it to the running light on the brake light.

ghostntheshell · Oct 28, 2009

Ordered my M/C Mods tail light today!

I'm carzy.

My mod list this season:

1.) Custom paint (all three skins)
2.) Muscle seat ( I love it)
3.) Ceramic Coated my Hindle 4-1
4.) Chrome scoops
5.) SS Brake lines
6.) Tail light (as of today)
7.) Knee Brace (never came in the mail - but paid 100 bones for it)
8.) Fork brace

Gotta love the sport eh? It all adds up

gamorg02 · Oct 28, 2009

how many miles?

4gasem · Oct 28, 2009

ghostntheshell said:
Ordered my M/C Mods tail light today!

I'm carzy.

My mod list this season:

1.) Custom paint (all three skins)
2.) Muscle seat ( I love it)
3.) Ceramic Coated my Hindle 4-1
4.) Chrome scoops
5.) SS Brake lines
6.) Tail light (as of today)
7.) Knee Brace (never came in the mail - but paid 100 bones for it)
8.) Fork brace

Gotta love the sport eh? It all adds up

Yeah one winter I spent 5500 bucks on mine... Hell this last summer I spent 2500 on it getting it back together after a pitifully slow off... :damn angry:

These things cost a fortune.

I have 3700 or so miles on mine I think... It's an '06.

Tail Light Options

Help Support VMAX Forum:

Well-Known Member

Well-Known Member

Attachments

Well-Known Member

Proud Vmax lover

Attachments

Well-Known Member

Active Member

Well-Known Member

Attachments

Well-Known Member

Well-Known Member

Attachments

Proud Vmax lover

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Attachments

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Similar threads

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!