98

Upgraded to a muscle exhaust and have no need for this anymore. Asking $200+shipping for all. Would prefer to not ship.

Hi all! I have a 98 runs great and I am ready to do some mods. I just ordered VooDoo exhaust and I am considering doing a carb kit and K&N filters. I live in Colorado and have been told to not do the carb kit.... due to our elevation. Any Ideas??? :ummm:

I bought a 98 v max with 3,700 miles on it. Typical issues, former owner left gas in it for over 4 years. I tore down the carbs and cleaned them and then put the new parts in out of the k and l build kit. I did not replace the vacuum diaphragms as they looked good. I took the gas tank out and...

Full set of custom body panels. Taken off a 1998. Comes with everything in pictures. Will not separate. Great condition. Good quality air brush job. Front fender is for gsxr front end. Located in Alexandria, Ontario, Canada. Sent from my SM-G930W8 using Tapatalk

Hi Guys... I'm in need of a stock muffler for a Gen 1. I don't need the header pipes. Condition needs to be no rust on chrome and no road rash please. They can be drilled since I can reverse that. I gutted mine completely years ago and want to quiet it back down. Thanks! Jim

I've blown the unit, moisture inside it. Bur when I removed it it is the yellow sticker 85-89 Now I'm confused as the bike is a 1998 so it should be the newer icu in. It looks like it's a spare. My question is should the old Cdi run in a 1998 bike but make it run a bit rough? Or is my...

As I was putting my exhaust back on I saw some rust on the bottom of the frame a few inches behind the sidestand. Can I just have a gusset plate welded over it? It is a 20yr old scooter I don't think I want to find a frame and swap it out. Included some snapshots. Thanks in advance.

So, what makes this so? Looking at the 1996 models, they came with 140 hp rating. That's a huge, I said huge, difference from the below 100 hp of the 1998 models. Where did they hide it? Airbox? Heads? Exhaust?

Like the title says I replaced the coolant hoses on my 98 vmax as they appeared to be original and were pretty sketchy. Bought some made in China silicone hoses as they were much cheaper than oem. Seemed to go well but I saw a drip at the large hose at the bottom of the radiator where it goes...

Hey guys.... I have 4 coils from my 98 Vmax, all ohm out to factory spec. The two that were under the seat have the typical cracks that as I understand it don't affect performance. The two that were under tach have no cracks. I'd like to get $80 for the four coils, shipped free via USPS to...

3 inch over swingarm (made by a member of this forum) custom rear wheel 17x5.5 (190 rear tire) (made by a member of this forum) shortened stock rear fender Barnett clutch braided brake and clutch lines Delkelvic exhaust (on order) Shindy brake master and clutch Switch to adjust vboost...

Thinking about parting with my 98 vmax love the bike but thinking about trying something different. Has the corbin seat and cbr tail light snd super trap pipes. Thinking about asking 4200 for it but I'm open to offers. In NH

Tired of trying to sell it myself at shows and Craig's List. Banks wouldn't finance it unless the Buyer can set up a Line of Credit so here it is at Gateway Classic Cars.:clapping: Insurance Appraisal was $21,500.00 http://www.gatewayclassiccars.com/tampa/1998/dodge/ram-S509.html Dave

Have a broken ear on one of my carbs. What years are compatible with the 98? Thanks in advance...

Clutch was slipping a little so I decided to replace disks. Ordered a Barnett Clutch Spring Conversion Kit and their friction and steel plates. Of course that was before I researched it and saw that that is not the way most folks go. Read this how to post...

Front tire is slowly leaking around the bead. I was wondering if certain years have this problem? Since, mine is a 98 and has the black rims. Is this only happiness with the black rims? It's a new front tire. It has 1000 to 1500 miles. After reading in the wheels/tires section. It seems like...

Front tire is slowly leaking around the bead. I was wondering if certain years have this problem? Since, mine is a 98 and has the black rims. Is this only happiness with the black rims? It's a new front tire. It has 1000 to 1500 miles. After reading in the wheels/tires section. It seems like...

So I took the battery out of my 98 v-max last fall, charged it and put it in my heated basement on a wood block. Took it out last week, charged it at 2 amps overnight and threw it in my v max. Went to start it, lights came on, but no vboost sound and nothing else happened. Made sure it was in...

http://www.ebay.com/itm/Yamaha-V-Max-1998-yamaha-v-max-1200-and-a-complete-parts-bike-/271775920039?forcerrptr=true&hash=item3f471b6fa7&item=271775920039&pt=US_motorcycles

Just picked up a 98 model that's been DynoJett'd, 155's according to the documentation I was given, including a dyno run where it pulled 110 hp and 77 lbs of torque. It looks like there are stock needles in the kit too, so assumed they've been added too, bike has Slip-on Trapps with 14 discs...