alternative

i have a stuck fuel screw and before i go to digging it out with a pic and a magnifying glass "been here done this my quickest time so far 10 hours"I was hoping someone might know of a screw with a head that would extend out with a knob or one like the old 80's honda's had if anyone has a site...

Just looking for the best stuff to make my grips stay put. I'd like it to last as long as possible and don't really care if it's hard to remove afterwards (within reason).

Wired the signals up and they just flash versus individually signal. Any thoughts? Fronts are the basic LEDs and I wired hot to hot, ground to ground and didn't use the blue (running light) and they both flash at the same time regardless of using left or right turn signal switch. Same in...

I just purchased this backrest for my Max. Just got it in from Japan. Very good quality. Was supposed to come with a helmet lock. The helmet lock was not in the box. Notified the company so hopefully it was just an oversite on their part. They have other parts too. Tried to get the Belly cowl...

Just read a Cycle World article on Honda's 2014 VFR-800 Interceptor, and going through the specs, I saw something that caught my eye. It has a 43mm non-inverted fork. It says there are no adjustments available for the fork, but then I looked at this image, and I see what looks like (at the bare...

my gen1 vmax revcounter appears dead,wiring is ok ,cannot see anything burned etc.as the revcounter gauge is built in with the temp gauge substituting it for a universal gauge means hacking it about.anyone done it ,or should i just buy a used unit from fleabay.thanks

Hi, Seafoam is not available here, but I find another product that looks similar http://crcindustries.com/auto/?s=05316 It costs about $10 here Does anyone have any experience with it? Thanks

I know this camera has been mentioned before when it went on sale at Big Lots a few months ago. I just thought I would pass this deal on woot.com along for those who missed it before. http://tech.woot.com/offers/emerson-720p-actioncam-with-mounting-kit It is the emerson action camera with...

I am thinking about making another exhaust canister to be a bolt-on install in-place of the stock Dragstar 'bologna-cut' shorty muffler, or the megaphone Jon sells. If you like the UFO 4/1 but would like to preserve your hearing and be able to 'let-'er-rip' in an urban environment without...

Anybody come up with a fuel pump that will work with the max???If not Ill be experimenting soon..

Has anyone successfully matched up any other u-joint for the vmax? I'd like to change mine while it's apart, but I'd rather just buy a u-joint. Not to have to buy a yoke and pay for the caps, bearings, and retainers separately. Dealership was $160.

I've always used NGK Iridium & love their performance & long life, I also used Bosch Silber (silver center electrode) & found them comparable to Iridiums in performance at a fraction of the cost, they are the same heat range as stock NGK spark plugs. Part # = XR4CS Bosch Silber

It has been stated in other threads (by sean) that the 6 pot calipers from the early 90's yzf750r are a direct bolt on for our '93+ Vmax's, it was also stated that these calipers are very hard to come by as the yzf750r is a realatively rare bike. This is true ,and when I have found them people...

You can swoop one of these things off Ebay for $30. Front fender off a 07 CBR 600R/R... You need to notch the top slightly to use the frame brace and that the hardest part (taking all of 10 minutes with a Dremmel) I made some brackets from the brakes to the bottom of the fender with some...

Something I found today Seems to be a cost effective substitute for headlight, look good IMO. It can fit H4 bulbs. I ask the ebay seller just by curiosity

For those of you who like the cybermax headlight might like this...

I nearly hijacked another thread:biglaugh: so I'm starting a new post so whoever is interested can be aware of a another possible source of vmaxparts.......He also makes a lot of nice looking CNC brake adapters.... There is a guy in the UK I ran across that sells a DIY kit for swingarm...

Rather than performing the shotgun, could you not just pull off a gas line and run some seafoam through the line while the bike is running? This would circulate through the whole carb - wouldn't it? :ummm: