cleaned

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. D

    Cleaned Carbs and replace fuel inlet valves. Now no fuel is getting into the bowls

    As the title states I ordered 4 rebuild kits which consisted of O-rings and fuel inlet bodies/valves. I noticed the new inlet valves are stiffer then the original ones (figured the originals were worn) and they hold the floats in the low position when turned upside down. This is uncharted...
  2. C

    Replaced my clutch and cleaned the carbs ride... A Vmax ride.

    With the double d clutch and carbs cleaned I took it for a quick ride yesterday. With that super hard Exceddra tire on it, it spins easily from a 5 mph roll. I was able to pull the front end up high in 1st gear, but not in 2nd gear. I never clutch up my bikes, just pure power. But end result...
  3. S

    Knee plates and cleaned up the tail lights

    Picked up the bike from the doctor yesterday, she's still sick:( but her meds are on the way Knee plates arrived early this morning and most of the day was spent just adding layers of flat black enamel between installing lights. Pulled off the tail section and fabbed up a nice steel guard for...
  4. supervetteracer

    What can I check? Cleaned carbs- LOW power. Feels like it's on 3?

    Just finished cleaning the carbs. I did NOT drill off the caps and re-do the fuel air screw. The bike now idles fine. When I take it to red line and shift it wants to almost studder. The pull seems linear if not a tiny bit exponecial. In other words it pulls pretty evenly throughout the...
  5. backfire

    Finally washed and cleaned the dang thing!!

    No..it's not what you think, so get your mind out of the gutter!! LOL! Well, after 2 1/2 years of ownership of this current bike, (it was in dry storage for 2 years) I broke down and washed the filthy pig for the first time since I've owned it. :clapping:Needless to say, I think it turned out...
  6. Max01red

    all cleaned up...

    Took a few new pics after todays detailing...
Back
Top