correct

This Intruder 1400 came into the shop I frequent today, the bike owner said, "it runs out of gas after about a mile." It didn't take the shop owner long to figure it out. Some numb-nuts used vacuum tubing for gas line! The bike owner is lucky it didn't rupture on a hot engine and burn both...

My vmax came without tank emblems and i want to order the correct original size 30-40 mm ? 30mm seems too small 40mm is the better of whats offered 30-55 mm.

will a 240 fit on the stock 18" rear wheel without any special things having to be done for it to fit. My thought is the 240 will fit on the stock 18" wheel and all it does is give a different look no other benefits. Am I correct?

https://www.youtube.com/watch?v=EA-OvBAlSrc

I have to adjust my valves with help form a good friend(local shop wants almost $600) could one of you fine ppl direct me to the CORRECT site to buy the shim kit,and CORRECT tool i need.thank you very much Bikes got 33k mileage,and it seems i am getting blow back into my crank case,oil smells...

I had V-Boost on full time and then when I installed my carbs last summer after Sean rebuilt them I connected the V-Boost so I could sync my carbs. Can someone tell me if I am correct on how to set it back to full time V-Boost. Do I turn key let the V-Boost sound happen and then disconnect...

Hello All Yet another question about the proper shim size. For example my #1 exhaust measured in at .20mm and the shim removed was a 250 (2.5mm) The book calls for .26-.30mm clearance. So if I am calculating correct my shim obviously has to be thinner. If I go with a 245 shim that will...

Hi All, Progreasive springs arrived and are #'ed 11-1129. Is this correct for a 98 Max ?????? Also says to use stock spacer???? Depends on rider weight, no???? TIA, Lew

I just installed one of the oil pressure guages that connects to the threaded opening in the crankcase by the oil level window and was wondering what a normal reading is. it's a stock 2000 motor and I was surprised to see the reading vary so much with the engine rpm. I don't remember ever...