double

Does it displace more brake fluid adding the second spring?

These neighbors who take offense to another who is a double amputee and who likes to work on cars in his great garage are trying to get him shut-down. http://jalopnik.com/awful-neighbors-are-suing-their-neighbor-because-he-wor-1787769218 Neighbors from H-e-l-l! :damn angry:

for example, if you go to this thread at the other forum and read the first question and see the answers. http://www.starvmax.com/kunena/14-installed-vmax-modifications-and-accessories/188200-how-do-you-fit-switch-to-turn-fan-on-when-its-hot Remember when I asked the same question, I was...

Hi guys what do you all think of the double diaphragm spring clutch kit? is it worth installing? i am just about to get my clutch plates replaced as I'm getting a slip on the higher gears and was just looking into this. what feedback have you'll got for this? easy to install, life etc. Thanks...

This morning I did the DD with the larger retainer and change the oil with Amsoil 20W-50 Synthetic (I was using Yamalube) Purolator PSL14610 Synthetic Spin-On Oil Filter. I noticed there was no gasket when removed the clutch cover (glad I ordered one!). I also replaced the final gear oil for...

Just did the double D clutch upgrade. I left the half clutch in the back so I'd have some slipping not to break any parts. But it won't go into Nuetral when the bike is running. When the bike is off it goes into N without an issue. Had it apart to check 3 times now and I can't figure it out for...

was wondering if you put a stock clutch spring and a pcw heavy duty clutch spring together to make the double D clutch modification, if there would be some problems with this set-up:ummm:

Does anyone know what would happen if you did the Double D without the second spring? Just replace the half disc, spring, seat and wire with a full disc and reassemble. I am not wanting a stronger clutch, but the wire was screwed up when I disassembled to replace second gear, and a new disc is...

Now this looks about different. Nice work, but definitely different.

Im trying the dd clutch set up and i here i should put a different pressure plate ring in so the two clutch springs stay in place and lined up. Can anyone tell me how to get this. Whould sean have it.

I just got a pair of NTC chrome blue double spring shocks for the max. It will lower the rear end 1 to 2 cm. will I have to worry about lowering the front end a lil bit as well? I have an 86 and i've heard its a pain in the ass lowering the front forks... any help or advice would be much...

Put new clutches in about 4 months ago and went with the barnett clutchesinstead of OEM , and they seemed to slip in 4th and 5th pretty bad under hard loads. Took them all out and skuffed up all the plates and that solved the problem. But I was going to go ahead and do something about the actual...

:bang head: had it installed for about 6 days just broke something in the driveshaft or final drive. I notice (before) when I shifted about 9500 rpm it sure jumped hard. Well I was getting ready to go on a ride tomorrow. No ride for me :angry flame devil:

To those of you that are running the two line SS front brake lines....what was your install order at the master cylinder? Did you put a copper washer between the fittings? Or did you just use two outer washers and none between the 2 fittings? -Mike

Hey whats up? I'm doing a clutch job on my max, i've noticed some slipping since i did a 4-2-1 kerker & stage 7 kit last summer ,i guess the extra hp was enough to finish the clutch .I'm going to do a double DD while i'm in there. My question is,how many friction discs (26H-16307-01)do i need...

The more I look at the diagram and parts required the more confused I'm getting. I've done clutch jobs before but not the Max. On the diagram from the service manual Section 3-67 from the vmaxoutlaw service manual link. I'm seeing that there are a total of 8 friction plates. It's...

Finally....some of us northern boys may get a chance to get out for a rip this week. I just hope we get some sun with the double digit temps....It's been a long winter, I'll be getting max ready for a ride. Yahoo ! :banana::banana::banana: