dyna3000

Is anybody running the new version dyna 3000 ignition? My green led is blinking as it should be but the red led is on solid when the bike is running and the instructions don't make any reference as to what it should be doing when the bike is running.

For those of you looking for the discontinued early version of the Dyna3000 (1985-1989), there is one on eBay ending in about 4 hours. http://www.ebay.com/itm/130969163816?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649#ht_3792wt_943

A buddy of the french forum recently bought a Dyna3000 CDI box for a 96 max. It is a programmable one with USB port! Do you have heard of this new CDI box? The doc in the box is a piece of **** with no usefull technical detail...

I have enough commitment and 6 payments already in hand to definitely proceed with the Ignitech module group purchase. Original thread with some more details linked below. Please note this thread has reference to a used MAP sensor which is not going to be the case (will include new MAP...

I can only report on what I know and have learned, so there very well may be more to the following than I am aware of, but from what I've found over the last couple of days, the Dyna3000 may become a hard to obtain item, at least in the near future, if not more permanently. I ordered a...

O.k. many of you probably already know this, but Dynatek has stopped making ignitions for the 85-89 Vmax. I talked to a guy named Larry, and he was a great person to talk with. I called them since my ignition is acting up and I was trying to see if they had any similar complaints. When I had...

I have a v-max tha last 6 years, the guy who sold me told me it is 1986 model, as i am a v-max lover, i was pretty sure that the bike was 1986 year because of the first generation rims, which yamaha replaced the 1988 , 2 pot front callipers, i recently bought a dyna 3000 and when i tried to...

I pulled out my ignitor 86 vmax because my rear 2 cyclinders were not firing. The exterior terminals were corroded on one connector. I popped it open and desoldered the terminals to remove he board. The pics show what I found. Diodes 8,9,10,11,12,and 13 were toast :angry flame: . Diode 1 looks...

What is the difference with the early model DYNA300 vs the later model? Or what is the difference with the stock ignitions in general? The reason I am asking is I have a Dyna 3000 for my 02 and it seems to work just fine, but could I also use it for my 85 drag bike? I still have my stock 02...

Well, I decided to sneak a new purchase past the wife... a Dyna 3000. I was hoping to get it before Conesville, and really wished I had it when I missedd 2nd gear, but it just arrived this morning... a few days late. Anyway, I see on the lable, that the model they sent me was D3K7-6 and it was...