ebc

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. C

    EBC rotor quality?

    Are EBC's a decent quality rotor? Do they look good 6mos later or can you watch them rust after washing your bike like Chinese rotors?
  2. Joken

    Front Wheel Hop? R1 calipers and EBC HH.?

    So i took my bike for a ride today after changing to r1 caliper and ebc hh pads, When i put the front brakes on the front wheel hops and pulsates? I scuffed the rotors prior to new pads.? About the front ens: I have the 17" cycle one off front wheel with rotor adapter, with stock rotors...
  3. racerboy

    EBC Pro-lites

    All beware when buying these rotors. Just got my set in to the tune of $435.00. They look good, bolts rite on, but there is one jacked up issue. The OEM rotor holes where the bolts (6) go are recessed in for clearance. BUT! The Pro-lites are not.. The bolt head is so close to the fork...
  4. A

    Brakes Please Help!

    I have a 92 VMAX 1200 and I'm looking for front and back brakes. I'm told EBC are the better brakes to go for but cant seem to find the model that I need. Also I have 2 rotors in the front so I need 2 sets for the front? Bare with me I'm new to this bike and this forum. Thanks in advance.
  5. D

    ebc main jets

    Has anyone used the large head ebc main jets in their vmax carbs?
  6. thundermax

    Ebc hh brake pads

    Have a 2005, all stock brakes. Looking for the ebc hh brake pad number for the front brake pads and the rear brake pads. If you know the ebc part no. for front and back let me know please. I found ebc-fa88hh, but site says 85-92 front, 93-07 rear. Does not say 93-07 for front. So it is...
  7. mavgrab302

    ebc or oem clutches?

    I bought pcw's stiff clutch spring took out the barnett clutches and put back in my old eom clutches, and now I'm getting 4th and 5th gear slip. So barnetts suck so I'm between the OEM's and EBC's clutches, which are better, they look like they are possibly made from same material. so which is...
  8. rebar

    EBC vs stock Late model brakes

    Iv got a few questions. My 85 with late model front end needs brake pads. Can someone explain the difference between ebc hh and organic, stock pads please. I dont want more braking power (long story), but Im not sure what pads are installed now. What year did Yamaha upgrade the front...
  9. Blackjack

    EBC Brake Pads

    Reading articles and posts it appears that the EBC brake pads are the best replacement for the Vmax. I found the complete set front and rear on ebay (See link below). Any comments or suggestions are welcome before I make this purchase. Click Here!
  10. ghostntheshell

    GALFER vs EBC - Discuss

    GALFER vs EBC - Discuss! Proper spelling this time :)
  11. gamorg02

    EBC vs Galfer rear rotor & warpage..

    have a galfer rear, and it seems to might be warping already. should know soon. so basically question is, does anyone here have galfers solid or ebc's solid rotor and have ever seen/had any warpage with them? i may switch to ebc since i had it on my last vmax and it worked well for the couple...
  12. John R

    Added EBC Brake Pads, Fork Leaks Now

    Well, I added the EBC HH brake pads front and rear. There is a very noticable difference in braking power now. However, the very same day I adDed the pads and tried it out, I noticed oil on my right fork that was left behind as the fork moved up and down from braking. I try to have at least...
Back
Top