flasher

I am planning to convert my '92 to LED turn signals and noticed the flasher unit is a rectangular unit with maybe 5 wires. I've converted a 650 Honda and 650 Kawasaki in the past and they used the common automotive style round 3 wire flasher unit. I was able to buy an LED flasher unit for those...

I am putting LED turn signals on my 2007. They will probably blink fast with the stock flasher. I know you can use resistors but that negates a lot of the power savings over incandescent lights. I found one that was recommended but it was only for 2nd gen. Any help would be greatly appreciated. R

Found a working Denso 066500-2292 turn signal flasher relay. New cost is $130 make me an offer :biglaugh:

Front or rear flasher LED in stock housing and lens I made it with LED driving light Dont mess with the bike it`s a Venture with a Vmax front end At the front end the LED stays on as position light and when flasher goes to blink, the micro relay blink them off, this way highest...

http://www.amazon.ca/SODIAL-Flasher-Blinker-Motorcycle-Indicator/dp/B00LHMWQXO/ref=pd_sim_sbs_s_2?ie=UTF8&refRID=1M450CVZG108Z69BVY5D Is the pin configuration correct for the Max?

Hello, I am ready to upgrade to LEDs on my 2004 vmax. For my other bike (Shadow Aero) it was very simple to connect the PNP relay but for the vmax I am confused from reading other posts here. Couple of questions: 1- Do I need to replace the factory relay (5 pins -- picture attached) with...

I want to change turn signal bulbs to LED. Do I need this? http://www.tobefast.com/Custom-LED-Electronic-Motorcycle-Blinker-Flasher-Relay.html or http://www.ebay.com/itm/181264817629?_trksid=p2055119.m570.l4456&_trkparms=gh1g%3DI181264817629.N8.S2.M935.R1.TR4...

This post started on another page, I am moving it here since it is different. http://www.vmaxforum.net/showthread.php?p=364623#post364623 Short story, my '07 Max was hit in a lot and the offender fled the scene. :( After browsing the forum pages on how to replace the ugly *** Mickey Mouse...

Hi guys, I have been wanting to install a 4 way flasher feature on the bike. I was thinking about following the diagram attached, but don't you think it's a bit overkill ? Any suggestion about a simpler way of doing it ? Thanks Michael

I am wondering about replacing the flasher relay under the left pod with a led flasher unit like these http://www.superbrightleds.com/cgi-bin/store/index.cgi?action=DispPage&category=CAR&Page2Disp=%2Fflashers.htm I know I will lose the auto cancel feature but it will mean that I dont need the...

Hello, I am looking for a LED flasher relay that match the OEM 5 pins connector, is it available?

So I spliced in a Custom Dynamics flasher as few weeks ago, but now want to take it out. However, I forgot where the brown (at least I think they are brown) wires go. Anyone got pics? Thanks in advance.

i dont like not having my auto cancel functional so i wanna play with my old flasher. (leds installed). also my leds are not so bright as they are when hooked to a straight 12v source like the running light circuit any ideas on that one? does anyone have a diagram for the little guy around or...

CHEAP brake light flasher If you like the idea of the Back Off brake light module, then you'll love this one I have found for a fraction of the price: http://www.bigrigchromeshop.com/Merchant2/merchant.mvc?page=BRCS/PROD/LITWH/UP90655 It does the same as the Back Off module and is fully...

Hey guys, I'm gearing up to install some Led turn signals and have been reading up on what needs to be done with the wiring to make them work. In addition to a diode at the turn signal indicator, I've been reading you need to usually wire in a relay other than the one on the bike. I'm not so...

Where is the stock flasher relay located? Does anyone know if this will plug and play or need hard wired? http://www.customled.com/products/flasher_relay/flasher_relay.htm -Paul

Just messing around wiring up the lights and led's on Max tonight, and thought I would say this. I have some ultra-bright led front signals in combination with the Artfibras tail section lighting (low watt 194 style). The right would blink fast, and left would go crazy buzzing in epi seizure...

I'm thinking about getting an electronic flasher that will allow LEDs all the way around with no load equalizers. I know its under the left scoop but has anyone replaced theirs? Is it two wire or three, or is it built into the other electronics somehow. thanks for any addvice!!

I have a 2000 vmax and when I turn on the blinkers it doesn't turn off unless I push in the button with my thumb?? Is this "normal"?? I thought it would turn off by it self after time or distance.Thanks for any help!!

Hey Guys... Got some super led turn signals on the way, and I don't want to run the load equalizers. Instead I want a true solution like the ELFR-1 http://customled.com/PRODUCTS/FLASHER_RELAY/flasher_relay.htm , so in the future additions can be added with ease. Does anyone here know if I...