gaskets

I know...I know..buy new ones...they are cheap and you don't take any risk's... But googling this topic returns a lot of people that are actually reusing them without any problems on cars. They just use some copper spray on both sides of the gasket!? Of course that both of the...

Trying to swap out my front header pipes with the Delkevic OEMs and can't get the silencer gaskets on the back end of the pipes without them breaking apart... Any help on how to get those on in one piece would be greatly appreciated...

I'm trying to replace the front exhaust pipes with the Delkevik OEMs and can't get the rear connection gaskets (silencer gaskets) on the ends of the pipes without them breaking apart... Any tips on how to get those on or point me to a less brittle gasket would be greatly appreciated...

New Marks 4-2 coming in!!! Are the header gaskets specific to the V-Max or just generic gaskets of a specific size? Anything else I should be prepared for with the install/removal? Any info would be helpful! Thanks!

Quick question...genuine or any decent aftermarket for stock motor ?

I was just installing a power outlet on my VMAX and when I went to move the Air intake housing a little bit to put wire by it, I noticed that the Rubber Gaskets that hold my Carbs on the engine were loose and the Carbs extually poped out of them.......I tried to reseat them in the gaskets but it...

Hi all, Anyone know exhaust gasket parts numbers and recommend who to purchase from? I am in Boston MA area if it matters. Anything else i would need from changing stock to Marks 4-2 exhaust? Thanks again, Nick

Using the great info on this site, I determined my stator was bad and replaced it. Unfortunately when all back together, the side cover gasket leaks oil. What is the best way to do this over with no leaks. I used new OEM gaskets on both covers. Do you think I can use the same gaskets since...

Hi everyone, first of all thanks for the great information on this site my vmax runs like a dream because of this forum. Its a a 1500 resleave (PCW) with copper head gaskets. After a few 100kms of running in the rear head gasket is weaping a very small amount of coolant. Other than replacing...

I need a full gasket set since I'm doin a full tear down, where do I get it the cheapest? What years will still work, I found a couple but they were for newer Maxes and mines an 85.

I recently purchased Marks 4-2 and was going to replace the exhaust gaskets while I am at it. Anybody know of where I can buy them? I saw some on oldbikebarn.com, but after looking at the specs it says they only fit up to a 95 Vmax. Is there specific gaskets for different years or is it irrelevant?

I need to replace my valve cover Gaskets. Any Idea on what shop time should be if I have it done at the shop? A local mechanic told me he could do it in about 3 hours. If that is accurate it may take me 6? Any thoughts advice or input?

Anyone know where I can get the manifold gaskets and the throttle cables other than from UFO???

Part #: 3GD-14613-00-00 Need (4) Looking for a vendor who has these in stock. I have checked the vendors around me and even called a couple of other places. Everybody is quoting 10-14 days for delivery. I have a brandy new Marks Pipe sitting on my garage floor and warm weather on the...

Hello Since the carbs are off anyway I removed my intake ducts today to clean everything up. Haynes says to reinstall with new gaskets every time. I'm wondering how crucial this is (old ones lok in good shape to my untrained eye). If it is crucial, can anyone find a part number? I couldn't...

Hey guys! I've got an 85 with 28k and Kerker 4-2. Lately it's been making some odd noises that I've narrowed down to exhaust leaks. I bought new gaskets that go to the heads, but they seemed fine once I started disassembly. I did find that the rear pipes are very loose where they're clamped...

Not the gaskets between the engine and headers. I mean between the headers and some used Supertrapps slip-ons. The stock exhaust has that metallic graphite-like gasketing in the cans part. Do I need to put the same stuff in the Supertrapps? Also the clamps off the stock I presume? It's a...

Does anyone on here sell exhaust gaskets, I'm using them on my 2007 VMAX and Marks's 4 into 2 pipes.

HELP i just ordered supertrapp slipons do they come with exhaust gaskets ? or should i order new ones

Is there a step by step guide for this?