gauges

GEN1 Gauges with aluminum wraparound $75 shipped CONUS

More photo's added all the time as we get more of these in with different configurations. The dual gauge is GPS based so no speedo cable. Perfect for the inverted front ends (note we can also provide a billet speedo eliminator if desired). ALSO, has a tach built in with shift light! The tach...

This pic was taken during a bikeweek in the Phils. I dont know the owner. Anyone know what brand of dash gauge and tach/speedo setup? Looks clean.

Picked up a bunch of gear from a retired '06 including the tach gauge cluster. Looks identical except for the fuel light wiring, theres and extra pin in the red connector (black on red wire)...My harness connector is black. What is the wiring mod needed or does the '89 sender have to be used?

Is there a easy way to remove solve faceplate from teach/temp/ and warning lights? I painted it and I dont like the way it looks. Looks like poop Sent from my SCH-I535 using Tapatalk

I was wondering what everone thinks are the most important gauges to have on a Vmax. Lets disregard the speedometer and tachometer for a second and focus on everything else. The ones that comes to mind for me are oil pressure voltage fuel pressure water temp oil temp air/ fuel wide band...

Is there such a thing? I know Cycle One Off is the go-to for oil pressure kits, by my handlebars are cramped as it is. I was looking at getting their waterpump mount kit: http://www.cycleoneoff.com/vmaxpag2.html However I'd kind of like to do what Warp did, and install this then disable...

Hi all I came across a brand of engine monitor tools that look very cool. I wanted to know if you guys know them and what do you think about them... Looks very practical and multi tasked and easy to fit. Anything you know about them and care to share im all ears (my surgeon says it can be fixed...

Does anyone know if the Honda Valkyrie speedo and tach will work on our bikes? I am not sure if the Honda is using electronic / digital indicator for the speedo or what gives the the Honda it's RPM signal. I just think the dual chrome gauges look bad ass!! As far as that goes I wonder if the Gen...

Anyone have any exp with these gauges? Looking to customize my instrument cluster and have two large gauges and led indicator lights. Only light i should be concerned with is the fuel light which is involved with the entire reserve circuit correct?

Like what I see on FB. Are the gauges on the KC build 52mm or 45mm? I've not made any secret id like to add some gauges to my dash but everything seems to be of the 52mm variety and I'm not sure they would fit.

Quik question. I feel the carbs need to be synced on the 95 I just bought. Would anyone know why I couldn't use the "old fashioned" vacuum gauges instead of the Merc or Protune? Thanks:ummm:

This is way freaking cool http://www.youtube.com/watch?gl=DE&hl=de&v=RrRpbensBLc http://www.motogadget.com/en/frameset.html?gclid=CION7uuIs6ECFQ5biAod3l2SDg Imagine this in the middle of your gauge pod http://www.motogadget.com/en/frameset.html?gclid=CION7uuIs6ECFQ5biAod3l2SDg Has all the...

There are quite a few threads scattered throughout the forum regarding gauges. I have been searching to try and find some good info and I have found some but, not everything I am looking for. So, if anyone has added aftermarket gauges, be it tach, temp, oil, boost, volts, amps, whatever...

So I read up on Cop Runner?s light mod and decided it was a great idea. The install was easy, but somewhat more complicated than I anticipated, so I thought I?d add a step-by-step with pics just in case anyone has had this on the backburner. It takes less than half an hour and is totally worth...

Coming from my experience with snowmobile racing, one of the important tuning tricks is to istall exhaust gas temp gauges in each head pipe of the exhaust. Used to tune the carburators of a 2 stroke engine to be insync in jetting and to monitor for lean spots at varied throttle positions. My...

Anyone familiar with the Monster Gauges on Cycle One Off? Got my Marks Exhaust, Mega scoops, fluted side covers, the last two things I need are the Progressive 440HD black shocks and the Monster Gauges!

Has anyone here ever used or seen a set of Fazer/Radian gauges used on a Max to get a tach located where it should be? If you look at the gauge cluster, it looks like they should bolt up to the max steering head. Jarrett