guru

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. J

    Tuneboy or Guru, the bigger gas tank question

    Good morning, My 2010 has an Akro pipe with the X-pipe and baffles removed. I also moded the air box by removing the plastic restrictor and added a K&N filter. My current setup uses a power commander 3 and I can say that I have suffered with a bad tune for a long time now. My bike dies at idle...
  2. PresaCan

    Gurued 2017 VMAX Finally Complete

    I am so happy that a member “Itgoes” connected me with Tim Nash (GURUEDGEAR). Anyone contemplating doing the reflash through Mr. Nash, DO IT. My VMAX now is like a new machine with gobs of power added. Starting October of 2018 we (my mechanic, shop owners and Tim) worked together modifying my...
  3. FLA-Vmax

    Guru contact info?

    Im searching for someone to do an ECU tune on a 2018 Max but im having trouble contacting the Guru guy (Tim Nash?). Can anyone help me out on this? Or know of anyone else qualified to play with the ECU?
  4. D

    Electrical Guru help?!

    So... Happened to be riding at night today and was lightly bumped in the rear at a red light... Turns out my tail light only works in neutral and it was definitely like that before the incident. Could this be related to the removal of the kickstand relay? I only mention it since that also...
  5. C

    Any hot tub guru's out there?

    Time for a new hot tub. I ve fixed this one for the last time! Looking at http://www.spadepot.com/shop/Belize-e750L-Lounger-Spa-P9749C843.aspx http://www.hottubsandportablespas.com/shop-by/carmella-49-jet-large-and-deep-hot-tub Both come out to be around $6000 when we add the...
  6. K

    Seeking Vmax Guru in Chicago

    Hello Vmaxers! so after recovering from a 2" rotator cuff detachment repair, it turns out I CAN still ride a max! So snagged my 3rd Max. I picked up a 2005 anniversary edition with less than 3k miles....well the previous owner F'd with the "tamper proof" a/f screws and may have damaged the...
  7. S

    Electrical Guru Needed!

    I have an 88..that had a bad voltage regulator in it,,replaced it with not one from Electro Sport,not once but twice,,it blew both of em,,,,got these from Capt Kyle,,and I trust his judgement 100%,,but the odd part is,,they both ran just fine,,till I shut the bike off,,,refired it,,and...
  8. A

    Possible carb sync issue need carb guru

    Hey guys My max runs fine. Plenty of power. The one thing i notice is the bike does not sounds right. No missfires at all. I checked the exhaust temps at the headers. Found the back two at operating temp are 200 degrees. The front two are cooler. The left front is 130 degress and the right front...
  9. VMax-Mike

    looking for a H.I.D Headlight guru

    Need to know all about everything to do with a H.I.D system. I see car's running around with a cool blue purple color. I want to light up the road on high beam's. Im also thinking about running lights.
  10. Bacchus

    arizona vmax guru

    I posted up in rides and hookups to try to get connected with others in the phoenix area so far nada..... seems like in arizona guys buy new, mile em up, throw em away and buy new again.... I was wondering if any one in the group knows of any arizona vmaxers, and especially would like to get...
  11. vmaxcruzer

    Question for the LED guru's

    I decided to swap all my speedo, gauge and indicator lights to LED. All is good except the the yellow turn signal led, it only blinks when the turn signal switch is to the left. If I turn the LED around it only blinks to the right. I do have all blinkers changed to LED, with the flasher for...
  12. HuecoDoc

    Vmax Guru's race ECU

    I've been watching for this, Vmax Guru got the race ECU and dyno'd it today. So far it doesn't look like it's the 240hp some were hoping for, just a speed delimiter: http://www.vmaxguru.com/Tech/Gen2/Pages/Race%20ECU/Race_ECU.bmp
  13. hubeerjw

    Gen 1 Main Pickup Coil Signals, Ignition, Timing Data from the VMax Guru

    I e-mailed Tim (the VMax Guru) a while back with a few questions on the gen 1 pickup signals. What I was hoping for was an easier way to get a 4 to 8 cylinder tach to work with the VMax. My idea was quickly shot down, but Tim did provide some nice data that I asked him if I could share with the...
Back
Top