harness

is there a test or how can one tell if a diode in the harness under the tach has gone bad?

I pulled mky 01 vmax motor out of the frame to repaint. That turned out great. What didn't is the fact that I am having a LITTLE problem making sure all the connectors are properly connected:ummm: Someone once took pictures step by step of a complete carb tear down and rebuild,which I have...

Wiring harness: $55 shipped Rectifier: $50 shipped Ignition box: $60 shipped (bought this as a replacement a few years ago so it works perfectly) Fuel pump: $65 shipped (includes surrounding brackets) Sent from my iPhone using Tapatalk

I got some help from Sean Morley on identifying the early (1985-1989) and late (1990+) model wire harnesses. Here are a couple of pics. The early harness has a white 6-pin connector for the ignition pick-up, but the connector only has 5 wires in it. The early harness also has a large white...

Looking for a clean 1990+ wire harness, PM me please. Thanks.

I need a 1990+ wire harness, the newer, the better. I don't want one that's been modified. If it had the stator wires soldered, that's OK, but would prefer one stock. Thanks.

Okay, I have a wire harness, how can I ID it? I want to know if it's for the 1985-'89 or the 1990-'07. I know the early has two pick-up coils & the late has one. Anyone got some pics that would show me or can you give me a description of what to look-for? Thanks.

Well I finaly pinned down my oil leak, coming out from the wires in the upper square rubber grommet of the left cover. I removed the middle gear cover for access, and I can push/pull the pick-up wires thru the rubber grommet. The stator wires and lower grommet are tight and not leaking. Has...

Hello all, long time no post. For my Gen 1, I tried fixing the hot start/charging problems...result warm starts now possible (have yet to get to the starter) but went riding yesterday and found out that my brake light is permanently on. Wiring work of late was 2 things (third side note is: also...

Wanted to ask if anyone has tried routing the wire harness through the frame? I'll be tearing my vmax down this winter to have Sean PC the frame and wanted to see if anyone has done this. I recently replaced my wire harness due to corrosion and had several ideas about routing the wires a...

Does anyone sell a complete aftermarket wiring harness for the Vmax? I recently bought an 86 model and one of the previous owners rewired or bypassed nearly everything on the bike. I downloaded a copy of the wiring diagram from this site which helped some but not enough. I'm to the...

WTFIT:ummm: I have been rebuilding/repainting my 1988 Canadian import. While trying to isolate a vboost problem I found this unidentifiable component lashed into the wiring harness. It connectes to the green wire and the blue/white wire. Both these wires have multiple reconnections to other...

i have a 1986 vmax and i need a new harness my harness has crack in the insulation and it is in need of replacing now my vboost isnt working because of it secondly dose any one have one for sale ?

First, the question I have is, what length do people make the connectors to go from the loom to the COP's? :ummm: Secondly, I have been having a lot of "fun" trying to work out exactly how to route my wiring harness back into the bike (as well as hoses etc etc etc). I pulled it apart ages...

Does anybody know if you can purchase new (OEM) or aftermarket (new) wiring harnesses for and '88 max :ummm:

Sorry for all the post lately but i am hoping to get the max mostly back together this 3 day weekend. I am putting the harness back in and i am not sure how the harness gets to the rear of the bike. does it come up under the fuel pump or around the coolant reservoir? I should have taken a couple...

What would be the best way to clean my wire harness? It's grimy from all the years and I want it to look like new before I reinstall it. I have no idea what would be a safe way to do this. Soap and water? I don't want to just tape and wire loom over the dirt. Thanks again for the input.

Many have asked about using their T-Boost set ups with the coil conversion harnesses. Now the way the T-Boost hooks up to the coil, could be better in my opinoin! Now I have had several people tell me that they have removed their T-Boost set ups because they would have to splice into their...

:ummm:I am tryng to find out who else might be interested in the COP's plug and play harnesses I have been making. If you are interested let me know at [email protected] I am looking at another round of resistors. I found another supplier that has them instock and will sell to...

ok Guys I have completed a run of 20 harnesses. For all that have spoken for them earlier, you have been sent emails , or private messages. If all of you that said you wanted them, take them. There will be only one more set available. Until more resistors become available. The issue is: the...