inside

Do you work on your VMax? I mean, work on it? Like, totally-disassemble your engine to rebuild it, rebuild your forks, strip it down to paint the bare frame? If you answered, "yes," then this is gonna make you salivate. Take a look at those pics, blow 'em up to see the number and types of...

I saw a pic of a max with LEDs in the scoops. will that person post a "how to" for them or PM me? and post some pics? Please Thank you got looking,,,Tony

Some had previously installed a K&N in my '03 and ridiculously overoiled it. I pulled it, cleaned the airbox, and am going to re-oil the filter. Problem is, as far as I can tell, air flow goes from the inside of the filter to the outside. If I oil the outside of the filter, won't that...

Thought this was funny. Todd

Well this is not my first rodeo when it comes to modified cars/bikes. I like to do lots of mods, and I love to document stuff. So naturally I produce a lot of DIY's. There is a lot of excellent information on this site, but some of it is somewhat spread out, and some of the pictures suck. So...

I have a 1990 VMax and recently have been having problems with it starting. The starter seems like it is going out and unable to turn the bike over. When the spark plugs are out the bike turns over just fine. The battery is brand new and fully charged. I am guessing that the starter is...

For those that dont know me or what happen.... I was down @ Reno for Street Vibrations and the last day there, I got in a bike wreck and totaled my tricked out 2000 Max. I'm lucky to be here alive with very minimal wrong with me! Just road rash or should I say hill rash. I'll tell that story...

I'm not sure what is wrong with my vmax. I have adjusted the valves, cleaned the carbs, synced the carbs, new plugs and wires. It will idle just fine and runs above 2000RPM perfect. Now driving around town is just horrible because it wants to run so rough and lumpy from 1500-2000 rpm. Once past...

Hey guys my vmax has always had a really lumpy idle. I just got done setting the valves and done a sync job on the carbs. All the carbs are clean and in good shape. I figured after adjusting the valves and doing a synce it would idle smooth but it doesn't. I also adjusted the mixture screws. New...

I have looked exhaustively for any info on Mikuni pilot jets and all I can get are thread pitch and overall length but I NEED the dimension of the hole of the respective jets. Can anyone give me those dimensions? I need the I.D. of a #40 and a #42.5. I have all of the necessary equipment to...

I saw the burnout story at the dealship I thougth I should share this burnout with you guys. This was the bike the preceeded the Vmax, a 1400 Intruder twin. It was a pretty snotty Vtwin bike, I could leave the line and run through about 50mph to surprise anybody out there, but then horsepower...

http://www.youtube.com/watch?v=nkXsJEZ90Wo&feature=related it roosts!!! :rofl_200: is that you coprunner??

Well i just took my stock exhaust off waiting for my new system to arrive, and figured why i have it off would be the time to pull the pan and check my o-ring. I was wondering if anyone thinks this is a good idea or to leave well enough alone? Whats the best fix for this issue kawi oval ring...

As the title says, I would like to know if anyone knows how much Lateral movement of Shaft inside Swingarm there is? I am knotching my swingarm and don't want to have the shaft banging around inside. :bang head: Thanks.

Ok so i have a question here and some reasoning behind it: A. Question: Who here (i know sean and definitely others) has seen a rear vmax wheel completely stripped down? and can remember which (if any) bolt holes go straight thru into the hub (dust cover screws or rotor screws perhaps?) B...

http://www.youtube.com/watch?v=of0Z7VgkCbo

http://rob.com/lancair/2008.vmax/

Hello Guys/Gals, I'm new on here and just wanted to ask some simple questions about one of the baddest motorcycles on the planet: The Yamaha Vmax. I never had a street bike before and until now, with the high price of gas that it is I'm really considering on buying a street bike. I always rode...

Looking to run a GPS on the 'Max and was thinking of a handle bar mount. I saw 4gasm had one when I met up with him, just seeing whats out there. Thanks fellas. :banana: