location

Hi guys: I just restored an 89 vmax, and took it to Ca DMV to get registered. I had to have the numbers verified, they were good. But there is supposed to be a sticker on it that shows something about whether it is a 49 or 50 state bike, and neither I nor the verifier could find one...

Last year I put in an R1 voltage regulator and stuck it under the passenger seat. The regulator went bad and was distroying batteries. I replaced it today and after a short ride I took the seat off and the regulator was already way too hot to handle. Got to find a better place to put it but...

My Indicators on my 1700 vmax 2009 have stopped working and I think it's probably the fuse, but don't know where it is, does anybody know where the Fuses on the Flasher Unit are please?? Thanks:eusa_dance:

I'm looking for ideas on what a guy should do for a catch can. When I get my 1500 together I will need to change my setup and eliminate the vacuum from the air box. The problem I am having is where to mount it. There is nowhere with much free space. Could I run barbs through the air box and...

Can and O2 sensor be welded in near the end of an exhaust system or does it have to be right on a primary near the engine where it is hottest? I've always had the impression that O2 sensor need to be very hot to operate correctly but my exhaust is ceramic coated. The "muffler" at the end isn't...

I want to add driving lights, but don't want to alter the style, etc. I am considering 2 options: See yellow marks on pic. A) a single horizontal LED strip ( Or a rectangular fog type) under the main headlight, somehow attached to the headlight bracket. B) adding two bullet...

Factory position has helmet resting on pipes. Not good when hot. So, I moved it to my back rack.... And I ordered a second one for the other side so I can lock 2 helmets easily for my sweetie... Old position mounted to the frame plate New position Does anyone...

Is there a reason for different locations of VIN plate sticker? On most VMaxes I have seen it's on the steering head tube, but on mine it is on the lower frame tube on the right side of the bike. Next to it is a CMVSS sticker. Is the placement a feature on Canadian models?

pretty annoyed today finally drove my Max to work today " or tried to" so anyway ive put on 200-300 miles on this summer flawless, this morning bike fires right up like usual drove 40 miles stopped put gas in went to fire it up and click click click!!!:bang head: no tools no nothing , so the...

Hi, Just dismantled all 4 carbies and put rebuild kits through them. As I was separating the carbies the workshop manual has a note not to loose the spring that connects the throttle levers. The good news is I didn't loose the spring but the bad news is that I couldn't see where it came from and...

Hi, Got my <!--[if gte mso 9]><xml> <w:WordDocument> <w:View>Normal</w:View> <w:Zoom>0</w:Zoom> <w:TrackMoves/> <w:TrackFormatting/> <w:HyphenationZone>21</w:HyphenationZone> <w:PunctuationKerning/> <w:ValidateAgainstSchemas/> <w:SaveIfXMLInvalid>false</w:SaveIfXMLInvalid>...

Hi All, I just picked up a 1999 VMAX and love it! One thing driving me bat sh!t crazy is the neutral light is flakey. I've swapped out the light and still no good so I'd like to have a look see at the neutral switch. Funny thing is I can't seem to find it! :bang head: Can someone...

Would anyone (MOD?) have a picture of the mixture screw locations on my 07 Vmax? Thanks in advance,

Hi All. Can someone tell me where the colour code is located on a 97 Vmax. Thanks. John :eusa_dance:

Hi guys, I wanted to know where should I install the ballast ? It's not a slim one. I tried the air scope, but it looks impossible. Since I have a small headlight cowl, I just put it for the meantime behind the speedometer. But I would prefer to hide it, to avoid anybody to get a free ballast...

Hi, My temperature gauge is dead and was wondering if anybody knows where the heat sending unit is located so I can test it electrically. 1986 V-Max Thanks, MaxxedNKansas

I need a new clutch (and a back tire too for some reason). I had a vendor bookmarked at one time that was selling the friction disks, Barnett conversion, and clear cover as a kit. I've lost my bookmark.... any Idea of who it could have been?

OK I've searched and read and searched again, and I think I know about every thing I need to about the manual fan switch, some of you guys have installed on your bikes, my question is this.....has any one installed the switch itself in the "blank" spot on temp, RPM, light(s) cluster...I think if...