newer

So I'm ready to change seats for the next phase of mods. Someone who wants a Corbin in good shape to swap for your stocker let me know. $100 plus shipping and your stock seat. PM me. There's a tear at the base of the back of the seat, and I have the largest corbin backrest that can go with...

What did you do? Description and pictures if you have them. I've seen Ryan's mount under the seat where the coils used to be. Has anyone used a mounting plate and bolted it in the stock location?

If I've read correctly, I can replace the standard '88 forks with something post-'92 if I replace both triples and the calipers as well, yes? Will the standard wheel from an '88 still work? (Digital speedo, so the speedo drive isn't an issue)

I've got a 85 style front wheel that i'm looking to get rid of in favor for a newer style front wheel. Just curious if anyone wanted the 5 spoke style front to mach an aftermarket rear or anything. Let me know! I'm not looking to sell my wheel or buy a different wheel, so i didn't post in the...

OK so I gather than the 97-or-so and up Vmax has wider forks. Does this mean that the whole fork set up is wider, just the shiny upper tubes are wider, or just the bottom tube "sleeves" (excuse my poor terminology - still learnin) are wider? Will a newer model shiny upper fork tube fit into...

I have an 85 and I use it for a 12 mile commute and road trips that involve as many twisties as possible. I don't however go all that fast like I did when I was young. The most expensive part are those darn drop down triples. Will the emulators and springs be good enough, should I find some...

Does anyone have a 2000 or newer stock exhaust in Excellent Condition they want to part with? I have an 2005 with Dale Walker Hole shot exhaust I would like to take off for a while. Bought the bike on ebay as a repo. so no stock exhaust. Please PM me, Thanks - Dan

My '85 has a piss poor charging system. I tried the crimp fix, soldering the 3 stator wires to the r/r unit, and running a ground wire from the unit to the battery. I just finished wiring the positive wire from the r/r directly to the battery, too. Start things up cold. (Battery reads...