option

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. M

    Fender eliminator option advice

    So, I purchased an 09 and it came with a fender eliminator on it with only the brake and driving lights. No license nor turn signal lights. Was thinking about this one on Ebay...
  2. maleko89

    New option to replacing slides/rubbers

    I was reading one of my many moto-magazines and there was a question on what to do when a replacement slide was not available. The first option was replacement rubbers which most of you are already familiar with. The second option was to use Loctite roofing sealant. It sounds like others have...
  3. one2dmax

    New Wheel Option

    Looks like I have a new set of wheel options available. I'll post up pictures as I get sets made. We will be using the All American Wheel blanks and a new machinist. Current patterns are the stock design similar to the MaxDaddy and Sportmax wheel. Also one like the UFO airframe. We may develope...
  4. Lotsokids

    Spark Plug Wire Set Option

    What do y'all think of these? Accel Extreme Heat. $45 on Ebay.
  5. Lotsokids

    Fuel Pump Replacement Option?

    I discovered that the plastic center piece on my fuel pump is cracked and leaking. I temporarily repaired it with some special rubberized tape, but the pump must be replaced. Will any of these work as a replacement? I'm trying to save money. Not sure what PSI is required. This was my first...
  6. tcflint

    Another Lithium Battery option

    Looking at an upgrade for my Vmax and I saw a few other types on here but didn't see this. http://sepbatteries.com/full-spectrum-p2-lithium-battery Has anyone used these? Pricing is still up there but cranking amps look good and style/fitment.
  7. J

    Good backrest option

    Hey all, first post here! I'm trading in my GSXR-600 on an 03' V-Max within the next week at my local dealership, already made a deposit, so yay for that! Real reason i'm here, is also why i'm doing the trade in. Looking for something that's fast, but a bit more comfortable for the...
  8. dmax1

    Another LED Brake/tail light option

    I saw this LED tail/brake light without integrated turn signals though for the max. It is plug and play as wiring harness included. They will even put the oem connectors for your specific application on the harness (for a fee) otherwise you have to put the ends on yourself. Only drawback is the...
  9. Ed in Mississauga

    Headlight Option

    My headlight keeps slipping off the internal clip on the headlight bucket which leaves it held in place only by the springs, causing my headlight to vibrate as I'm riding which is fairly annoying. This coupled with the low light output has me itching to replace the entire headlight. While...
  10. D

    Paint option.

    I'm thinking about maybe doing my scoops in this stuff. Super wet-look black 2k paint. That's some quick change at the end. https://www.youtube.com/watch?v=jTxwPHSkzsg
  11. srk468

    Possible new gauge option...

    http://www.dragzine.com/features/sema-coverage/sema-2012-auto-meters-new-lcd-gauge-display-technology/ Can't figure out how big this thing is yet but it would be nice if you could make it fit....
  12. ridinnoshiftin

    Headlight Option

    Well I have been exploring multiple options for the front headlight over the last few months. I haven't decided which route to follow as of yet. I thought I would share one of the latest finds and ask for opinions on light output, cosmetics and any other points of interest. This option kind...
  13. H

    Front end wobble and best tire option

    I have only a minor issue at 40 -45 mph and the front end has been checked out and tightened. My question is, do you think the fly screen and backrest contribute to it? Second what is the best tire option for a stock vmax. I have never been a fan of the Dunlops. Thanks Hwystar1
  14. bikedave99

    Cheap Exhaust Can Option

    If anyone is interested, I emailed Danmoto, and he quoted me $190 shipped for two CF cans with 2" inlet and hangers that will mate up with my Dale Walkers. I may pick some up sometime as my Dale Walkers are getting a little grubby. Love the Kerkers but they are too rich for my blood...
  15. DakRatFink

    What is my best option?

    I had a stuck/ stripped screw on my master cyl reservoir. I tried to easy-out it and got just the head, tried drilling the remainder of the shank out. I got most of it but I can't star a screw in the hole. How tight will the cap seal with one screw? Will it leak? Will it let in moisture? I...
  16. Ridin Dirty

    New Windsheild option.

    After installing a fork mount 7" headlight, I realized I had some more options concerning windshields. Headlight mounted shields could now be used. I then realized that I could relocate the turn signals onto the fork mounts for the headlight, by just drilling 1/2" holes into the mounting...
  17. bikedave99

    Sweet Accessory Switch Option!

    So, there are no nice low profile switches made for motorcycles that don't add to the clutter. That is unless you have a full dresser or a sportbike with lots of plastic hide stuff in/under. I have found one nice switch actually, I believe from Pingel but it is $$$$$. Anyway, found this sweet...
  18. ghostntheshell

    Paint option Poll...

    Trying to decide where I want to go with the Vmax, paint wise... I thought I'd poll and see what people think... ________ Health Forums
  19. mabdcmb@yahoo.com

    Tail Light Options

    So, I hate the tail light on my bike. It's disgusting. I have found a few options on ebay and the web. Monster Maxx http://www.monstermax.com/Solid%20brake%20light%20Vmax%20tailight.html I thought that this was an interesting tail light that may fit the Vmax. Anyone ever try it...
  20. Noxx72

    Another good splicing option.

    I'm a big fan of the marine grade crimp+solder splices with the adhesive lined shrink tube, however I had a chance to use these dudes recently at work and they really performed. For areas where getting a crimping tool into play would be a problem, these are the ****...
Back
Top