piece

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. B

    New tail piece needed

    Looking for a tail piece similar to extrap short tail rear end .but wider I'm running 200 back wheel and need to carry her indoors on original pilion seat. Anybody with pictures and a nudge in the right direction thank guys
  2. CNN SUCKS DONKEY

    The removable y piece atop 5the air box....

    Someone please tell me what this is for and why its removable ?
  3. CaptainKyle

    A piece of Vmax History

    Had to take my picture today on a piece of Vmax history. I think this is the only Gen 1 Vmax to ever run over 200 mph. Rip Bill warner. It was nice hanging with his brother today he is a real stand up nice guy like Bill was.
  4. Zeus36

    Three piece Danmoto Clip On bars - or - flipping the stock bars ?

    Decided to try out the Danmoto bars and spent half a day getting them configured. Due to it being a three piece setup, there are a lot of permutations. I wanted the clamps to have the stubs oriented at 9 and 3 to clamp the risers to, but that ran into a fitment issue with the master cylinders...
  5. T

    Front fork oil lock piece broken.

    What does this part do? Is this a dealer item? I noticed the one that isn't broken gets stuck when assembeled.. Please help, need to ride! John
  6. Traumahawk

    Plastic piece in slides

    On the plastic piece that fits on the needle, there is a small little *** that fits into the slide. When you do anything with the needles, you have to rotate the needle, until that nipple falls into place on the slide. Everyso often, i will tend to break the nipple off of the plastic piece...
  7. CustomMax

    New Custom ONE PIECE shafts/gears

    Sean hooked me up big time!! And now it looks like between Sean and Steve there is a permanent fix or cure for the shaft/gears that MadMax (Paul) put in the earlier model big tire swingarm kits. Mine snapped at least 4-5 times and now Sean sent it out to the other side of the world and instead...
  8. bazwell

    Veronica's two piece seat

    I think that the original seat design was pig ugly. That middle piece looks stupid. I'm going to use this thread as a record of doing a modded seat. First thing is to check if my idea will work. :biglaugh:
  9. F

    lost a piece while riding

    Ok I do not know the proper name but here goes. I lost the rubber piece that is directly under my left side scoop. This looks to be a rubber water deflector for the plug. The inside piece is there but not the outer piece that attatched to that one. Does anyone have this piece? It will drive me...
  10. KJShover

    Own a piece of hotrod history

    http://cgi.ebay.com/ebaymotors/moody-blues-street-driven-funny-car-/200466043796?cmd=ViewItem&pt=Race_Cars_Not_Street_Legal_&hash=item2eacb51394
  11. N

    coming apart piece by piece

    Well after having 2nd gear failure and learning that only way to fix it is removal of engine I decided it was time for something big :-) So I am pulling the 1198cc but when Max goes back together it will have a 1300cc with Overdrive!!!! I'm going to try and have some fun posting a bunch of pics...
  12. Jayhawk

    Looks like we all own a piece of the Motor Co.

    Link here
  13. Rusty McNeil

    Tail piece details

    Sean, you had asked for these a long time ago, I apologize for taking so long, lot's been going on around here..... I hope they help but in truth not sure they will......hard to tell WTF your'e looking at in most of them...
  14. maxcruiser

    Need a slip on end can piece

    Hey guys, I have had a Kerker 4-2-1 exhaust system for a long time and over the winter I bought a Scorpion can as I'm looking for a different sound for the bike. Problem is the the Scorpion can is a 3 bolt on style from a 1200 Bandit and the Kerker requires a slip on style. I tried emailing...
Back
Top