plates

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. Wyatearp71

    Factory Tool Kit and Exhaust End Plates

    Looking for Gen 1 factory tool kit and the rear end trim plates for the rear of the exhaust pipes (what most remove for the factory exhaust mod). Thank you! Sent from my Moto G (4) using Tapatalk
  2. Osiris

    Sticky clutch plates

    I've been addressing my clutch issues since I've got the bike. It would die while in gear with clutch lever pulled. It looked as though the fluid had never been changed. I rebuilt master and slave cylinders. I also replaced stock clutch line with SS . New long pushrod and new bearing. The...
  3. THMAX98

    What to do with your old clutch plates

    What do you do with ya old clutch plates? Bin em? Frisbees for the kids? keep em for eva for no reason? heres my solution :clapping:
  4. I

    frame with title and plates from Europe

    I am in a need for a cheap frame with title / documents preferable from Europe since I am located in Sofia, Bulgaria. My bike is 2006, but would consider any year. Crashed, damaged frames for cheap is the best option for me. Prefer them from Europe otherwise I need to pay a lot for shipping and...
  5. D

    Historic plates in MD?

    The lady at the MVA said that they strictly only allow historic plates on bikes that only travel to events, along with weekends and holidays... Now, with that said, I grabbed historic plates to ride to school daily. My question is how big of a deal is it? My dad and popop assured me that...
  6. S

    Knee plates and cleaned up the tail lights

    Picked up the bike from the doctor yesterday, she's still sick:( but her meds are on the way Knee plates arrived early this morning and most of the day was spent just adding layers of flat black enamel between installing lights. Pulled off the tail section and fabbed up a nice steel guard for...
  7. X

    Clutch plates

    :bang head: What part does the small clutch plate in the back of the clutch basket play in the Gen 1 ??? And can the small wrap around spring be removed and a standard plate be installed with out any future problems ?
  8. B

    Personalized Plates

    If you had six characters to use, what would your Vmax plates say? Just brainstorming some ideas, haven't plated the Max yet.
  9. Langley182

    New clutch plates... won't engage.

    The original idea was to fix the "hard to find neutral" problem according to the tech bulletin. When we opened up the clutch housing, my brother decided to get a new clutch pack. Here is what happened: We bought new friction and slip plates from Sean (big thank you, btw). We removed the old...
  10. CustomMax

    Modded knee plates

    Well, here they are so far. Just gotta finish buffing or have them chromed Damn pics won't load. I'll try again
  11. VMax-Mike

    Vmax knee plates

    How can i get a set. http://global.ebay.com/Yamaha-VMX1200-Vmax-Knee-Plates-knee-pads/110719334997/item
  12. B

    Clutch plates don't look quite right looking for clarification

    I am reinstalling the Barnette Clutch plates. I've put all the parts that I took off back on: One washer, one flat washer with tabs, one nut, one little ball bearing and the bolt looking thing that goes on last. Seems like there is room for more disks or do the clutch plates sit in the basket...
  13. mymax04

    personalized plates??

    I have been thinking for a long time for what plate Im gonna come up with for my max & the bast that Ive came up with is "mkntme" cuz I was out in the garage one day talkin to myself & said I needed to make some time to go riding. Or I came up with "THEFLU" Cus its freakin sick.:biglaugh...
  14. mattness

    bought plates today and they ended in

    666!!! she asked me if i was superstitious and she showed me the plate i was like hail yaaaaa. i was just telling her how i was gonna die on this bike this year lololol
  15. V

    Frame Strengthening Plates?

    http://www.exactrep.com/acatalog/info_255_E.html Does anyone have these? Where do they go? How do they compare to frame braces or solid motor mounts?
  16. D

    think I burned up my clutch/friction plates

    Went to do a 2nd gear burnout today before getting my new tire on ...wouldnt spin (not enough water probably) so I said f@@k it and went to trailer it and it would hardly move! changed the clutch friction plates and steel plates approx 2 yrs ago....yamaha brand. Took them out and there is a...
  17. R

    home made lowering plates

    Does any body else have to stand on their tip toes while siting on their Max :damn angry: Well I use too. Plus the bike was so tall,..It was like mounting a horse. YA,..I'm a little guy.....with a need for big power :eusa_dance: So heres my low buget, labour intensive fix.! I took some carboard...
  18. bbadwheels

    Steal Plates

    What are all my options on cleaning my steal clutch plates up before reinstalling? Thanks, Dave
  19. S

    Vanity plates?

    What's the concensus of this fine forum on the topic of vanity plates? I've always thought about getting one, but never have. Now I need new plates on the new max....and I'm thinking about it again. So, do these bikes possess the attitude to justify the cockyness; or are they already cocky...
  20. daves86vmax

    Ferodo clutch friction plates

    Does anyone know anything about this brand of friction plates?I saw them on ebay from Python Motorsports.$99.00 :ummm:
Back
Top