puller

Well, as promised Steve (jedi) has sent me the community fly wheel puller, which I am now holding and is available on loan to all Australian Vmax forum members. If you need to remove your fly wheel (and all who tried know how much of a SOB that is!) contact me here via PM or email...

This is for use of the community puller only and does not refer to other puller types. 1. Remove stator cover and the bolt that holds the flywheel onto the crank. 2. Screw the 3 x threaded rods into the f/w face by hand by about 10mm or so, no need to use vice grips or pliers or the...

I got to use my jedi-matic fly wheel puller on my xvs1100 yesterday and it worked really well. That's the 3rd time I have used it on 3 different bikes including my max without any drama at all. I had wondered if I just got lucky after the first time I used it but now I'm convinced it's the...

First off, this is a previous question of mine - Starter clutch bolts - tack welding? I may have to replace my stator - I'm going thru all the fault finding processes currently - but for now I have no questions about that procedure. My question is about the...

Hi, So I've decided its time to tackle the can of bolts problem which has started to present itself on my 92 Max with 18k on the clock by pulling the flywheel and retightening, lockseal and peen the starter clutch bolts. The bike is only able to be started now by cracking the throttle during...

There has been a few threads about pulling flywheels and trouble associated with it and I think I might be able to help. The puller I made, so far has worked easily without any problems .The design is different from the normal type and that is why I think it works. Maybe I just got lucky with...

Tried getting my flywheel off today and unfortunately had some setbacks: 1. first puller i tried cracked in half 2. second puller i tried nothing happened. banged on it TONS of times with my mini sledge, nothing. 3. went to autozone and got their puller as i read some have had luck with...

Aloha guys....I am doing the dreaded starter clutch!!I have a descent craftsmen's puller w 9.8 grade bolts...She wont budge. any tricks or even a puller that i can buy that works???Also who has these and the best replacement?Mahalo! Aloha Ke Akua AAron