rotor

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. Osiris

    Flywheel/ rotor 96 vmax

    Im looking for a good shape in working order Rotor /Flywheel for my 1996 vmax.
  2. F

    Gold Front Brake Rotor Paint

    Does anyone know of a paint that closely matches the gold center of '98 front rotors? Nothing I've seen in the local hardware or box stores is even close. TIA
  3. S

    Rear brake rotor

    Doesn't have to be pretty, just straight.
  4. C

    EBC rotor quality?

    Are EBC's a decent quality rotor? Do they look good 6mos later or can you watch them rust after washing your bike like Chinese rotors?
  5. CNN SUCKS DONKEY

    Rotor bolts = unicorn search

    97 vmax 24k seems like all the rotor bolts i find on ebay are used. jp cylcles seems to have new bolts but got to check tomorow for aplication. any long time vmax owners reuse their rotor bolts? or go by the book and replace with new bolts ? if so where did you find them ? Im replacing the...
  6. C

    Rotor question with aftermarket wheels

    Hey guys! Quick question, a search yielded no solid answer. I have a 2003 Vmax. It has a 17" Dymag rear wheel, and an 18" Dymag front. Will these wheels still use stock style rotors? Do I need to order anything special, or just rotors for an 03 Vmax? Rear rotor is looking slim, and I'm...
  7. H

    1990 front brake rotor sizing

    I replaced a warped rear about 6 months ago. Now, I have a warped front rotor. Bars shake during freeway on ramp launch, I can no longer take my hands off the bars and coast. I can spin the front tire and clearly ID offending rotor. I have fresh pads, fork seals, and head bearings...
  8. D-Max2012

    New Brake and Rotor Grab

    Quick question. How many of you have changed out all rotors and pads at the same time? I just changed out all 3 rotors and all new pads. Ran a test ride and feels like I have to press / pull harder to stop correctly. I'm guessing that they need to break in properly to get the most...
  9. Traumahawk

    Aftermarket rotor minimum thickness

    From what Ive seen on the Galfers, and the Toby Huang knock offs, they are 5 mm thick new. Does anyone know what the minimum thickness for these rotors? Thanks
  10. TB99Max

    Rear rotor opinions

    I am going to need to replace my rear rotor real soon and wanted some opinions if I should find a used stocker, or is it worth it to upgrade to one of those cross drilled eBay specials?! Or is there another low cost option? I would love to do the R1 with Sean Morley's adaptor but I've been...
  11. Y

    Ideas to remove stripped rotor bolts.

    I was removing my old rotors and one rotor came off easy, and the other one had 3 screws where the allen heads were stripped, and I tried everything I could think of to get them out. Used an impact driver, tried hammering a bigger allen and also a torx bit in there with no luck. Next I tried...
  12. Poolio

    Rotor bolts

    Where can I get all new front and rear rotor bolts? I found a few places on line that were like $60 for just the 6 on the rear. Can I use a normal m8x25mm button head bolt or are they special bolts? Any help much appreciated
  13. D-Max2012

    Rear Rotor

    Has anyone had any experience with rotors like these? Stock ones cost too damn much.. http://www.ebay.com/itm/like/261687070800?lpid=82&chn=ps http://www.ebay.com/itm/EBC-Rear-Brake-Rotor-Yamaha-FJ-1100-1984-1985-FJ-1200-86-95-V-Max-91-02-MD2068-/360817050498
  14. B

    venture rotor

    Looking for length of 1st gen venture rear brake rotor. Need something about 12 1\2 to 12 5\8. I think its the same bolt pattern as the vmax.
  15. Vmaxnewfie

    Rear rotor upgrade

    I just picked up a set of used EBC wave front rotors. Anyone know where or what kind of rotor to get on the rear to match the wave front rotors?
  16. B

    FZ1 rotor and caliper modification

    I am in the process of adapting the FZ1 2000-2005 caliper (blue dot) and the 267 rear rotor to my max and I think I have a inexpensive solution. The caliper on the Fz1 is underslung which I like so it would require a post to be welded on the underside of the swing arm. (I had previously welded...
  17. Traumahawk

    Rear rotor upgrade

    I bought the adapter from Sean, to be able to use a large rotor on the rear of my 07. Does anyone have a pic of how this is supposed to be bolted on? I guess that I'm having a brain fart, because I'm just not able to picture how it bolts on. Thanks
  18. VMax-Mike

    Is this the outside of the front rotor

    It looks like the rotor bolt heads go on this side to me.
  19. Phazernut

    Rotor Life Span

    I recently got my first V-Max. An 03 all stock with only 11000KM on it. Bike is like new. I have a pulsing in both the front and rear brakes. Just wondering if the rotors could be already warped? I am the 3rd owner of the bike and both previous owners were 60+ year old riders who never rode the...
  20. O

    Rear LRG rotor stock caliper adapter

    I just recieved a great looking adapter to run the larger rotor on my back wheel with the stock caliper. The kit came with the adapter plate, two spacers/bushings, and two stainless bolts. My question is how does this install. I am hopeing that someone has a picture on one installed that I can...
Back
Top