shifter

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. Conman

    WTB: Foot Shifter & Post-1996 Crossover Brace

    I’m looking for a clean, straight foot shifter to replace my bent one. I’m also looking for a bent frame brace so that I can update oil changes in my ‘95. Lastly, can anyone comment on how well these work? They’re half the cycle one off price...
  2. CaptainKyle

    MRE air shifter

    Please email instead of pm [email protected] MRE air shifter on the bike less than 6 months & used twice at the track & a couple times on the street. It has a dynatek co2 adaptor & 2 co2 bottles. I made a plug and play harness for the ignition kill so you dont have to cut into the factory...
  3. ShadyTunerGTS

    PC III or PC V w/ quick shifter

    Was wondering if anybody hooked up a quick shifter and what they have used (which sensor, which power commander, etc.) and what kind of settings need to be adjusted on the power commander. I'm going to be getting exhaust and Tim Nash Gurued ECU flash first, then want to get a quick shifter...
  4. jdeitz1979

    Anyone have a shifter

    As the title says, I need a shifter. Anyone have one? Sent from my iPhone using Tapatalk
  5. D

    Shift lever, left mirror and aftermarket clutch/front brake levers

    Need these parts ASAP, let me know if you have them!
  6. K

    shifter lever

    how do I adjust this ?
  7. C

    Looking for Gear shifter (shift pedal)

    Looking for Gear shifter (shift pedal) Looking for a used, reasonably priced, part
  8. Dorney

    Shifter

    Looking for a good shifter. Thank You Dave
  9. dmax1

    shifter alignment

    I was cleaning the bike when I noticed the shift lever was missing the hold down bolt. I have a bolt to replace it. My question, is there an alignment mark on the shift lever that I align with on the shaft. I do see a dot on the shaft. Also does anyone have a picture of where the shaft should be...
  10. J

    Shifter shaft seal, use sealers?

    replacing my shifter shaft seal. Does anyone recommend using a sealer in addition to the round seal? Thanks! :ummm:
  11. Biker Dash

    Heal/Toe Shifter

    I was thinking that this might be a potentially good idea, having a heal/toe shifter. I was thinking that for upshifts, it would be much more positive with the upshifts, I have seen reverse pattern shifters before, and I do not like the idea of that on a bike on the street. I have also seen...
  12. J

    2010 Vmax shifter on 85

    So, with my redneck modification that the previous owner did to my shifter, I'm still not happy with the way it feels. I would normally just buy a stock shifter, but due to where he moved it, I don't think it has the proper clearance anymore. However, looking at the 2nd gen's shifter, that...
  13. J

    Shifter fell off.

    Ok, so I got my awesome 85 max today! Love her! Rode her home, on the way, I'm shifting along, and look down, the shifter is hanging from the linkage, apparently the bushing that goes on the shifter mount fell off. My wife was in front of me, so we used some hair ties (Yes, hair ties) to just...
  14. 1st Shirt Maxer

    Air Vs Electric Shifter

    I am starting the upgrades for having some fun at the track. So far I found air shifters and electric shifters for track day so my question is what are the pros and cons to both. Fitment, looks and price are irrelevant I just want to make sure what I put on the bike will last as it will take...
  15. donnelly317

    Shifter seal and bolt next to it????

    How hard is it to change the shifter seal I do have a chaindrive so that rear cover above shifter just pops off nothing but bearing behind it ( not sure if the shaft drive had oil in there) and then is it just a rubber lip seal I can work out with a pick?? Also while I was at thunder I looked...
  16. PaleDeth

    Shifter broke off

    On my way home last night (midnightish) I noticed that when I shifted to first the shifter seemed to go down farther than I remembered. Didn't think much of it at the time. Next I notice that when I shift the shifter would act accordingly. If I shifted up the shifter would stay up threw each...
  17. davidon

    Free Play in shifter

    There seems to be some free play in my shifter when I put some weight on it before shifting..does not feel tight like it used to before going into gear..now feels a little bouncey. What would cause this? I did take off the middle gear nut and put it back on..don't know if its related or...
  18. S

    Pingel shifter

    Pingel Enterprise is currently working on a custom electric shifter for the Gen 1 V-max, ( I work in the R&D dept. it is my personal bike), I am putting out feelers for interest in the project to see if it is worth bringing a kit to market. Enough e-mails to sales may persuade them to offer it...
  19. donnelly317

    shifter oil seal?

    My seal is dripping after I ride. How hard is it to change this??
  20. G

    Shifter Stuck 1985 V-Max

    I was driving on the highway and made an exit and could not down shift. I made it to the next light and managed to slip the clutch enough to limp home. I did manage to shift it down to second gear but it will not shift any lower?? I was not hammering on the bike and never abuse it at all. The...
Back
Top