spacers

VMAX  Forum

Help Support VMAX Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. Y

    Spacers with Progressive springs.

    I'm in the process of rebuilding my forks, and installing Progressive springs. According to the instructions that came with the springs, I need a spacer length of 9.37". The stock spacer is 9 5/8", and the PVC spacers that came with the springs are close to 10". I'm assuming I will need to...
  2. P

    Handlebars or spacers??

    Have done my homework as far as searching goes on here. Have found both spacer information and a little bit on handlebars but information is usually missing, so..... What I am after is to have a bit more mechanical advantage with a slightly longer bar as well as moving the bars back a little...
  3. G

    Preload Spacers

    Does anyone know where to get preload spacers? I cut mine too short and currently have 0.00" of preload. I'm sure I can call up Racetech, but they may charge me an arm and a leg. Thanks, Glen
  4. naughtyG

    A cry for help!

    ok so my bike's been off the road for 3 weeks now, because of waiting for parts. Last week I ordered the spacer and spacer flange I found to be missing from my front wheel assembly when I started fitting my new wheel bearings. Today I called the Yamaha :2gunsfiring_v1: stealers, only to be...
  5. Jaoteay

    2 Sets of Stock Springs and Spacers

    I have two sets of stock springs (Front) and spacers if anyone's interested... (We just upgraded to Progressive) -Joey
  6. m-cman

    Front Fender Spacers

    My new 110/80-18 Radial front tire is about 1" shorter overall than the stock 110-90-18. Where can I source some 6mm ID spacers so I can get the fender back close to the tire? Kinda looks like a motocrosser or adventure tourer right now....
  7. Vitek

    what do you use for spacers in racetech set up?

    I'm in process getting racetech springs and emulators and I just find out from tech support that it doesn't come with any spacers. I want to lower about 1-2 inches. I have machine shop at my work so they can make anything I want :) so the question is what do you use for spacers and I would love...
Back
Top